Dimensions - 6145M with Open Operator's Station and Front-Wheel Drive Axle

LX1056884-UN-07MAY13

LX1056885-UN-07MAY13

	Open Operator's Station
A - Wheel Base..............	2765 mm	(108.9 in.)
B - Length
• Basic weight 110 kg to draft link in horizontal position ..............	4726 mm	(186.1 in.)
• Front weight 1150 kg to draft link in horizontal position ..............	5141 mm	(202.4 in.)
C - Height
- Maximum total height from ground to extended ROPS (without beacon light), with rear tires with an SRI of:
• SRI 800 ..............	2847 mm	(112.1 in.)
• SRI 825 ..............	2872 mm	(113.1 in.)
• SRI 875 ..............	2922 mm	(115.0 in.)
• SRI 925 ..............	2972 mm	(117.0 in.)
D - Width
• Front axle, two parts - flange to flange ..............	1740 mm	(70.1 in.)
• Front axle, three parts - flange to flange ..............	1940 mm	(76.4 in.)
• Front axle - maximum tread width without extension ..............	2250 mm	(88.6 in.)
• Rear axle - flange to flange ..............	1664 mm	(65.5 in.)
• Maximum width for road travel ..............	2550 mm	(100.4 in.)
E - Ground Clearance
- Maximum ground clearance at front-wheel drive axle, with front tires with an SRI of:
• SRI 600 ..............	453 mm	(17,8 in.)
• SRI 625 ..............	478 mm	(18,8 in.)
• SRI 650 ..............	503 mm	(19,8 in.)
• SRI 675 ..............	528 mm	(20,8 in.)
• SRI 700 ..............	553 mm	(21,8 in.)
• SRI 800 1..............	653 mm	(25.7 in.)
- Maximum ground clearance at differential housing with drawbar, with rear tires with an SRI of:
• SRI 800 ..............	523 mm	(20.6 in.)2
• SRI 825 ..............	548 mm	(21.6 in.)2
• SRI 875 ..............	598 mm	(23.5 in.)2
• SRI 925 ..............	648 mm	(25.5 in.)2

IMPORTANT: Ground clearance and height of the tractor depend on the tire manufacturer, tire pressure, ballast, trailer hitches, implements attached, etc.

Before driving through gates, tunnels, bridges etc., the height of the tractor must be checked.

All dimensions are valid for tractors whose tire combination has been selected so that the main frame is horizontally oriented.