Loads and Weights - 6145M

Tractor weights*:

6145M

Total weight ..............

5964 kg (13148 lb.)

Front axle load ..............

2386 kg (5260 lb.)

Rear axle load ..............

3578 kg (7888 lb.)

* Details apply to a tractor equipped as follows:

• 600//65R38 rear tires

• 1000/540E/540 rear PTO

• 45 cm³ hydraulic pump

• Cab, not suspended

• 480/65R28 front tires

• Number of selective control valves, 2

• 110 kg (243 lb.) basic weight

• Without air brake system

• Front-wheel drive axle suspended

• Passenger seat

• Front fenders

• Swinging drawbar

• PowrQuad transmission 24/24

• Center link

• Without fuel in tank

 

Note: Additional equipment, other transmission versions and deviating tire sizes affect the weight details.

Maximum permissible static vertical load

6145M

- Drawbar category ..............

CAT 2

- On standard drawbar (road travel)

 
 

• extended 250 mm (9.8 in.) ..............

1600 kg (3527 lb.)

- On heavy-duty drawbar (field operation)

 
 

• extended 250 mm (9.8 in.) ..............

2250 kg (4960 lb.)

 

• extended 350 mm (13.8 in.) ..............

1400 kg (3086 lb.)

 

• extended 400 mm (15.7 in.) ..............

1200 kg (2646 lb.)

- On height-adjustable trailer hitches at 40 km/h (25 mph)

 
 

• on trailer hitch ..............

2000 kg (4400 lb.)

 

• Trailer hitch (CUNA type C) ..............

1500 kg (3300 lb.)

 

• piton-fix tow hitch ..............

3000 kg (6610 lb.)*

- On height-adjustable ball-type tow hitch at 40 km/h (25 mph)

 
 

• lowest position ..............

3000 kg (6610 lb.)*

 

• all other positions ..............

2500 kg (5510 lb.)*

 

• on ball-type tow hitch (field operation) ..............

4000 kg (8815 lb.)

- Static vertical load on non height-adjustable ball-type tow hitch at 40 km/h (25 mph)

 
 

• with EU operating license at 40 km/h (25 mph) ..............

4000 kg (8815 lb.)*

- Hydraulic pick-up hitch at 40 km/h (25 mph)

 
 

• on tow hook..............

3000 kg (6610 lb.)*

 

• on ball-type tow hitch..............

3000 kg (6610 lb.)*

 

• on CAT II drawbar at 400 mm (15.7 in.)..............

800 kg (1765 lb.)*

Maximum permissible front axle load (with front-wheel drive axle)

 

- Normal operation up to 40 km/h (25 mph) ..............

4780 kg (10538 lb.)

- With front loader, up to max. 10 km/h (6 mph)** ..............

6960 kg (15344 lb.)

Maximum permissible rear axle load ..............

7270 kg (16028 lb.)

Maximum permissible total weight (without front-wheel drive axle) ..............

8500 kg (18738 lb.)

Maximum permissible total weight (with open operator's station and front-wheel drive axle) ..............

9650 kg (21275 lb.)

Maximum permissible total weight (with cab and front-wheel drive axle) ..............

10000 kg (22046 lb.)

* Maximum permitted travel speed is 40 km/h (24.9 mph). At higher travel speeds, the maximum permissible static vertical load is limited to 2000 kg (4400 lb).

** For front loader work, select a tread width between 1750 - 1950 mm (68.9 - 76.8 in.).

NOTE: Traffic regulations in certain countries may restrict the permissible axle loads and total weight to figures lower than those quoted above.

OULXA64,00036FE-19-20160202