Two-Piece Front Axle — Tread Widths for Front Wheels with Rims for 2 Positions - 6110M

LX1057502-UN-26MAY15

Two-Piece Front Axle

LX1053400-UN-07MAR12

IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 2 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 730, 733 and 735” and “Preventing Front Wheel or Fender Contact with Tractor Components” in this Section.

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2.55 m (100 in.).

		Tread widths on delivery	Front wheel tread widths Arrangement of rim and wheel dish					Tread widths on delivery	Front wheel tread widths Arrangement of rim and wheel dish
Tires:			1	2		Tires:			1	2
10.5/80-18 -R4	mm	1758	1758	1590		380/85R24	mm	1814	1814	1526
	in.	69.21	69.21	62.60			in.	71.42	71.42	60.08
11.2R28	mm	1814	1814	1528		380/85R28	mm	1812	1812	1526
	in.	71.42	71.42	60.16			in.	71.34	71.34	60.08
12.4R28	mm	1814	1814	1528		400/80R24 -R4	mm	1814	1814	1526
	in.	71.42	71.42	60.16			in.	71.42	71.42	60.08
13.6R24	mm	1814	1814	1526		400/80R28 -R4	mm	1812	1812	1526
	in.	71.42	71.42	60.08			in.	71.34	71.34	60.08
13.6R28	mm	1812	1812	1526		420/65R24 -R4	mm	1814	1814	1526
	in.	71.34	71.34	60.08			in.	71.42	71.42	60.08
14.9R24	mm	1814	1814	1526		420/70R24	mm	1814	1814	1526
	in.	71.42	71.42	60.08			in.	71.42	71.42	60.08
14.9R28	mm	1812	1812	1526		420/70R28	mm	1812	1812	1526
	in.	71.34	71.34	60.08			in.	71.34	71.34	60.08
16.9R24	mm	1812	1812	1524		420/85R24	mm	1812	1812	1524
	in.	71.34	71.34	60.00			in.	71.34	71.34	60.00
280/85R28	mm	1814	1814	1528		440/65R24	mm	1814	1814	1526
	in.	71.42	71.42	60.16			in.	71.42	71.42	60.08
320/85R28	mm	1814	1814	1528		440/80R24 -R4	mm	1812	1812	1524
	in.	71.42	71.42	60.16			in.	71.34	71.34	60.00
340/85R24	mm	1814	1814	1526		480/65R24	mm	1814	1814	1526
	in.	71.42	71.42	60.08			in.	71.42	71.42	60.08
340/85R28	mm	1812	1812	1526		480/65R28	mm	1812	1812	—**
	in.	71.34	71.34	60.08			in.	71.34	71.34
380/70R24	mm	1814	1814	1526		480/70R24	mm	1812	1812	—**
	in.	71.42	71.42	60.08			in.	71.34	71.34
380/70R28	mm	1812	1812	1526		540/65R24	mm	1812	1812	—**
	in.	71.34	71.34	60.08			in.	71.34	71.34
** Installation in this position is not allowed