Three-Piece Front Axle (Version 2) — Tread Widths for Front Wheels with Rims for 2 Positions - 6135M

LX1057503-UN-13MAY15

Three-Piece Front Axle

LX1053400-UN-07MAR12

IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 2 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See in this section:

1. “Three-Piece Front Axle (Version 2) — Overview of Axle Category and Axle Type”
2. “Three-Piece Front Axle (Version 2) — Adjust the Fixed Fenders and Steering Stop”
3. “Preventing Front Wheel or Fender Contact with Tractor Components”

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2,55 m (100 in.).

		Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish					Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish
Tires:			1	2		Tires:			1	2
13.6R28	mm	1830	2030	1830		420/70R28	mm	1830	2030	1830
	in.	72.0	79.9	72.0			in.	72.0	79.9	72.0
14.9R24	mm	1830	2030	1830		420/85R24	mm	1850	2050	1850
	in.	72.0	79.9	72.0			in.	72.8	80.7	72.8
14.9R28	mm	1830	2030	1830		420/85R28	mm	1852	2052	1852
	in.	72.0	79.9	72.0			in.	72.9	80.8	72.9
16.9R24	mm	1830	2026	1830		440/80R24 -R4	mm	1830	2026	1830
	in.	72.0	79.8	72.0			in.	72.0	79.8	72.0
16.9R28	mm	1826	2030	1826		440/80R28 -R4	mm	1826	2030	1826
	in.	71.9	79.9	71.9			in.	71.9	79.9	71.9
320/85R28	mm	1852	2052	1852		480/65R24	mm	1832	2028*	1832
	in.	72.9	80.8	72.9			in.	72.1	79.8*	72.1
340/85R28	mm	1852	2052	1852		480/65R28	mm	1828	2032*	1828
	in.	72.9	80.8	72.9			in.	72.0	80.0*	72.0
380/70R28	mm	1830	2030	1830		480/70R24	mm	1830	2026*	1830
	in.	72.0	79.9	72.0			in.	72.0	79.8*	72.0
380/85R24	mm	1850	2050	1850		480/70R28	mm	1826	2030*	1826
	in.	72.8	80.7	72.8			in.	71.9	79.9*	71.9
380/85R28	mm	1852	2052	1852		540/65R24	mm	1830	2026*	1830
	in.	72.9	80.8	72.9			in.	72.0	79.8*	72.0
400/80R28 -R4	mm	1830	2030	1830		540/65R28	mm	1826	2030*	1826
	in.	72.0	79.9	72.0			in.	71.9	79.9*	71.9
420/70R24	mm	1830	2030	1830
	in.	72.0	79.9	72.0
* Total vehicle width greater than 2,55 m; the regional road traffic licensing regulations or other applicable regulations must be observed.