Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop (Version 1) - Front Axle 730, 733 and 735

IMPORTANT: For information on differentiating between the fender versions, see “Two-Piece Front Axle - Distinction between Fender (Version 1) and (Version 2)” in this section.

IMPORTANT: Observe the following points in this section:

• “Two-Piece Front Axle — Notes on Adjusting the Fenders (Version 1)”

• “Two-Piece Front Axle — Notes on Adjusting the Steering Stop (Version 1)”

• Refer to the “Tire Combinations” for the front wheels authorized for the tractor.

IMPORTANT: It must be ensured that the steering stops can be screwed in to a depth of at least 10 mm (0.4 in.).

• Adjust the steering stops to prevent the wheels from coming into contact with tractor components. See also “Prevent Front Wheel or Fender Contact with Tractor Components” in this section.

NOTE: For front loader work, select a tread width between 1750 - 1850 mm (68.9 - 72.8 in.). The recommended tread widths are listed in the table and marked by an asterisk (*).

Tire Size	SRI [mm]	Tread width [mm]	Fenders		Positions at which fender can be installed						Steering stop [mm]
			Width [mm]	Length [mm]	I	II	III	IV	V [mm]	VI
11.2R28	575	1524	370	1280	B-2-IN	D4-E2	CTR	DOWN	250	IN	34
		1616	370	1280	C-1-OUT	D4-E2	TIRE	DOWN	250	IN	28
		1720	370	1280	A-2-OUT	D4-E2	TIRE	UP	180	IN	28
		1812*	370	1280	C-2-OUT	D4-E2	TIRE	UP	180	IN	28
		1924	370	1280	E-2-OUT	D4-E2	TIRE	UP	200	IN	28
		2016	370	1280	E-2-OUT	D4-E2	TIRE	UP	200	IN	28
12.4R24	550	1525	370	1280	C-2-IN	D5-E3	CTR	UP	180	IN	34
		1617	370	1280	B-1-OUT	D5-E3	TIRE	UP	180	IN	31
		1721*	370	1280	D-1-OUT	D5-E3	TIRE	UP	200	IN	28
		1813	370	1280	B-2-OUT	D5-E3	TIRE	UP	200	IN	28
		1925	370	1280	D-2-OUT	D5-E3	TIRE	UP	220	IN	28
		2017	370	1280	E-2-OUT	D5-E3	TIRE	UP	220	IN	28
12.4R28	600	1523	370	1280	D-2-IN	C4-D2	TIRE	UP	120	IN	51
		1615	370	1280	B-1-OUT	C4-D2	TIRE	UP	120	IN	44
		1719	370	1280	D-1-OUT	C4-D2	TIRE	UP	120	IN	28
		1811*	370	1280	B-2-OUT	C4-D2	TIRE	UP	150	IN	28
		1923	370	1280	D-2-OUT	C4-D2	TIRE	UP	150	IN	28
		2015	370	1280	E-2-OUT	C4-D2	TIRE	UP	150	IN	28
13.6R24	575	1524	370	1280	D-2-IN	D4-E2	CTR	DOWN	250	IN	44
		1616	370	1280	A-1-OUT	D4-E2	TIRE	DOWN	250	IN	38
		1720	370	1280	C-1-OUT	D4-E2	TIRE	DOWN	250	IN	28
		1812*	370	1280	A-2-OUT	D4-E2	TIRE	UP	180	IN	28
		1924	370	1280	C-2-OUT	D4-E2	TIRE	UP	180	IN	28
		2016	370	1280	E-2-OUT	D4-E2	TIRE	UP	200	IN	28
13.6R28	625	1614	370	1280	C-2-IN	C3-D1	TIRE	UP	100	IN	53
		1718	370	1280	A-2-IN	C3-D1	TIRE	UP	100	IN	33
		1810*	370	1280	A-2-OUT	C3-D1	TIRE	UP	100	IN	28
		1922	370	1280	C-2-OUT	C3-D1	TIRE	UP	120	IN	28
		2014	370	1280	E-2-OUT	C3-D1	TIRE	UP	120	IN	28
14.9R28	650	1521	420	1440	B-1-IN	B4-C2	TIRE	UP	60	CTR	81
		1613	420	1440	A-1-OUT	B4-C2	TIRE	UP	80	CTR	61
		1717	420	1440	C-1-OUT	B4-C2	TIRE	UP	80	CTR	44
		1809*	420	1440	A-2-OUT	B4-C2	TIRE	UP	80	CTR	36
		1921	420	1440	C-2-OUT	B4-C2	TIRE	UP	100	CTR	28
		2013	420	1440	E-2-OUT	B4-C2	TIRE	UP	100	CTR	28
16.9R24	625	1718	480	1440	B-1-OUT	C3-D1	TIRE	UP	100	OUT	51
		1810*	480	1440	A-2-IN	C3-D1	TIRE	UP	100	OUT	34
		1922	480	1440	B-2-OUT	C3-D1	TIRE	UP	120	OUT	28
		2014	480	1440	D-2-OUT	C3-D1	TIRE	UP	120	OUT	28
280/85R28	575	1524	370	1280	B-2-IN	D4-E2	CTR	DOWN	250	IN	34
		1616	370	1280	C-1-OUT	D4-E2	TIRE	DOWN	250	IN	28
		1720	370	1280	A-2-OUT	D4-E2	TIRE	UP	180	IN	28
		1812*	370	1280	C-2-OUT	D4-E2	TIRE	UP	180	IN	28
		1924	370	1280	E-2-OUT	D4-E2	TIRE	UP	200	IN	28
		2016	370	1280	E-2-OUT	D4-E2	TIRE	UP	200	IN	28
320/85R24	550	1525	370	1280	C-2-IN	D5-E3	CTR	UP	180	IN	34
		1617	370	1280	A-2-IN	D5-E3	CTR	UP	180	IN	31
		1721*	370	1280	D-1-OUT	D5-E3	TIRE	UP	200	IN	28
		1813	370	1280	B-2-OUT	D5-E3	TIRE	UP	200	IN	28
		1925	370	1280	D-2-OUT	D5-E3	TIRE	UP	220	IN	28
		2017	370	1280	E-2-OUT	D5-E3	TIRE	UP	220	IN	28
320/85R28	600	1523	370	1280	D-2-IN	C4-D2	TIRE	UP	120	IN	51
		1615	370	1280	B-2-IN	C4-D2	TIRE	UP	120	IN	44
		1719	370	1280	D-1-OUT	C4-D2	TIRE	UP	120	IN	28
		1811*	370	1280	B-2-OUT	C4-D2	TIRE	UP	150	IN	28
		1923	370	1280	D-2-OUT	C4-D2	TIRE	UP	150	IN	28
		2015	370	1280	E-2-OUT	C4-D2	TIRE	UP	150	IN	28
340/85R24	575	1524	370	1280	C-2-IN	D4-E2	CTR	DOWN	250	IN	44
		1616	370	1280	B-1-OUT	D4-E2	TIRE	DOWN	250	IN	38
		1720	370	1280	D-1-OUT	D4-E2	TIRE	UP	180	IN	28
		1812*	370	1280	A-2-OUT	D4-E2	TIRE	UP	180	IN	28
		1924	370	1280	D-2-OUT	D4-E2	TIRE	UP	180	IN	28
		2016	370	1280	E-2-OUT	D4-E2	TIRE	UP	200	IN	28
340/85R28	625	1614	370	1280	B-1-OUT	C3-D1	TIRE	UP	100	IN	53
		1718	370	1280	D-1-OUT	C3-D1	TIRE	UP	100	IN	33
		1810*	370	1280	B-2-OUT	C3-D1	TIRE	UP	120	IN	28
		1922	370	1280	D-2-OUT	C3-D1	TIRE	UP	120	IN	28
		2014	370	1280	E-2-OUT	C3-D1	TIRE	UP	120	IN	28
360/70R24	550	1525	370	1280	D-2-IN	D5-E3	CTR	UP	180	IN	39
		1617	370	1280	A-1-OUT	D5-E3	TIRE	UP	180	IN	37
		1721	370	1280	C-1-OUT	D5-E3	TIRE	UP	200	IN	28
		1813*	370	1280	A-2-OUT	D5-E3	TIRE	UP	200	IN	28
		1925	370	1280	C-2-OUT	D5-E3	TIRE	UP	200	IN	28
		2017	370	1280	E-2-OUT	D5-E3	TIRE	UP	220	IN	28
380/70R24	575	1524	420	1440	D-2-IN	D4-E2	CTR	DOWN	250	CTR	41
		1616	420	1440	B-2-IN	D4-E2	CTR	DOWN	250	CTR	28
		1720	420	1440	C-1-OUT	D4-E2	TIRE	DOWN	250	CTR	28
		1812*	420	1440	A-2-OUT	D4-E2	TIRE	UP	180	CTR	28
		1924	420	1440	C-2-OUT	D4-E2	TIRE	UP	180	CTR	28
		2016	420	1440	E-2-OUT	D4-E2	TIRE	UP	200	CTR	28
380/70R28	625	1614	420	1440	A-1-OUT	C3-D1	TIRE	UP	100	CTR	43
		1718	420	1440	C-1-OUT	C3-D1	TIRE	UP	100	CTR	30
		1810*	420	1440	A-2-OUT	C3-D1	TIRE	UP	100	CTR	28
		1922	420	1440	C-2-OUT	C3-D1	TIRE	UP	120	CTR	28
		2014	420	1440	E-2-OUT	C3-D1	TIRE	UP	120	CTR	28
380/85R28	650	1521	420	1440	E-2-IN	B4-C2	TIRE	UP	60	CTR	81
		1613	420	1440	A-1-OUT	B4-C2	TIRE	UP	80	CTR	61
		1717	420	1440	C-1-OUT	B4-C2	TIRE	UP	80	CTR	44
		1809*	420	1440	A-2-OUT	B4-C2	TIRE	UP	80	CTR	36
		1921	420	1440	C-2-OUT	B4-C2	TIRE	UP	100	CTR	28
		2013	420	1440	E-2-OUT	B4-C2	TIRE	UP	100	CTR	28
400/80R24	600	1523	420	1440	B-1-IN	C4-D2	TIRE	UP	120	CTR	72
		1615	420	1440	D-2-IN	C4-D2	TIRE	UP	120	CTR	48
		1719	420	1440	B-2-IN	C4-D2	TIRE	UP	120	CTR	47
		1811*	420	1440	D-1-OUT	C4-D2	TIRE	UP	120	CTR	28
		1923	420	1440	B-2-OUT	C4-D2	TIRE	UP	150	CTR	28
		2015	420	1440	D-2-OUT	C4-D2	TIRE	UP	150	CTR	28
400/80R28	650	1521	420	1440	B-1-IN	B4-C2	TIRE	UP	60	CTR	N/A
		1613	420	1440	D-2-IN	B4-C2	TIRE	UP	80	CTR	65
		1717	420	1440	B-2-IN	B4-C2	TIRE	UP	80	CTR	46
		1809*	420	1440	D-1-OUT	B4-C2	TIRE	UP	80	CTR	35
		1921	420	1440	B-2-OUT	B4-C2	TIRE	UP	100	CTR	28
		2013	420	1440	D-2-OUT	B4-C2	TIRE	UP	100	CTR	28
420/65R24	550	1617	420	1440	C-2-IN	D5-E3	CTR	UP	180	CTR	28
		1721	420	1440	A-2-IN	D5-E3	CTR	UP	180	CTR	28
		1813*	420	1440	D-1-OUT	D5-E3	TIRE	UP	200	CTR	28
		1925	420	1440	B-2-OUT	D5-E3	TIRE	UP	200	CTR	28
		2017	420	1440	D-2-OUT	D5-E3	TIRE	UP	220	CTR	28
420/70R24	600	1615	420	1440	D-2-IN	C4-D2	TIRE	UP	120	CTR	41
		1719	420	1440	B-2-IN	C4-D2	TIRE	UP	120	CTR	38
		1811*	420	1440	D-1-OUT	C4-D2	TIRE	UP	120	CTR	28
		1923	420	1440	B-2-OUT	C4-D2	TIRE	UP	150	CTR	28
		2015	420	1440	D-2-OUT	C4-D2	TIRE	UP	150	CTR	28
420/70R28	650	1613	420	1440	D-2-IN	B4-C2	TIRE	UP	80	CTR	61
		1717	420	1440	B-2-IN	B4-C2	TIRE	UP	80	CTR	41
		1809*	420	1440	D-1-OUT	B4-C2	TIRE	UP	80	CTR	31
		1921	420	1440	B-2-OUT	B4-C2	TIRE	UP	100	CTR	28
		2013	420	1440	D-2-OUT	B4-C2	TIRE	UP	100	CTR	28
420/85R24	625	1718	480	1440	B-2-IN	C3-D1	TIRE	UP	100	OUT	51
		1810*	480	1440	D-1-OUT	C3-D1	TIRE	UP	100	OUT	34
		1922	480	1440	B-2-OUT	C3-D1	TIRE	UP	120	OUT	28
		2014	480	1440	D-2-OUT	C3-D1	TIRE	UP	120	OUT	28
440/65R24	575	1616	480	1440	D-2-IN	D4-E2	CTR	DOWN	250	OUT	41
		1720	480	1440	B-1-OUT	D4-E2	TIRE	DOWN	250	OUT	39
		1812*	480	1440	D-1-OUT	D4-E2	TIRE	UP	180	OUT	28
		1924	480	1440	B-2-OUT	D4-E2	TIRE	UP	180	OUT	28
		2016	480	1440	C-2-OUT	D4-E2	TIRE	UP	180	OUT	28
440/80R24	625	1614	480	1440	E-2-IN	C3-D1	TIRE	UP	100	OUT	32
		1718	480	1440	B-1-OUT	C3-D1	TIRE	UP	100	OUT	32
		1810*	480	1440	A-2-IN	C3-D1	TIRE	UP	100	OUT	32
		1922	480	1440	B-2-OUT	C3-D1	TIRE	UP	120	OUT	32
		2014	480	1440	D-2-OUT	C3-D1	TIRE	UP	120	OUT	32
480/65R24	600	1615	480	1440	B-1-IN	D3-E1	TIRE	UP	150	OUT	62
		1719	480	1440	A-1-OUT	D3-E1	TIRE	UP	150	OUT	39
		1811*	480	1440	C-1-OUT	D3-E1	TIRE	UP	150	OUT	39
		1923	480	1440	A-2-OUT	D3-E1	TIRE	UP	150	OUT	28
		2015	480	1440	C-2-OUT	D3-E1	TIRE	UP	180	OUT	28
480/65R28	650	1717	480	1440	A-1-OUT	B4-C2	TIRE	UP	80	OUT	55
		1809*	480	1440	C-1-OUT	B4-C2	TIRE	UP	80	OUT	50
		1921	480	1440	A-2-OUT	B4-C2	TIRE	UP	80	OUT	28
		2013	480	1440	C-2-OUT	B4-C2	TIRE	UP	100	OUT	28
480/70R24	625	1718	480	1440	A-1-OUT	C3-D1	TIRE	UP	100	OUT	47
		1810*	480	1440	C-1-OUT	C3-D1	TIRE	UP	100	OUT	41
		1922	480	1440	A-2-OUT	C3-D1	TIRE	UP	100	OUT	28
		2014	480	1440	C-2-OUT	C3-D1	TIRE	UP	120	OUT	28
540/65R24	625	1718	540	1540	E-2-IN	C4-D2	TIRE	UP	150	CTR	64
		1810*	540	1540	C-2-IN	C4-D2	TIRE	UP	150	CTR	45
		1922	540	1540	A-2-IN	C4-D2	TIRE	UP	150	CTR	37
		2014	540	1540	A-2-OUT	C4-D2	TIRE	UP	150	CTR	29
VF 520/60R28	650	1811*	540	1540	B-1-OUT	C4-D2	TIRE	UP	150	CTR	45
* Tread width setting on delivery. Recommended tread widths with front loader operation.