Dimensions - 6110M to 6130M with Open Operator's Station and Adjustable Front Axle

LX234692-UN-24APR15

LX234693-UN-24APR15

	Open Operator's Station
	[mm]	[in.]
A - Wheel Base..............	2753	108.4
B - Length
• Basic weight (110 kg) to draft link in horizontal position (hoes, CAT3) ..............	4557	179.4
• Front weight (1150 kg) to draft link in horizontal position (hoes, CAT3) ..............	4972	195.7
C - Height
- Maximum total height from ground to extended ROPS (without beacon light), with rear tires with an SRI of:
• SRI 625 ..............	2672	115.2
• SRI 700 ..............	2747	108.1
• SRI 725 ..............	2772	109.1
• SRI 750 ..............	2797	110.1
• SRI 775 ..............	2822	111.1
• SRI 800 ..............	2847	112.1
• SRI 825 ..............	2872	113.1
• SRI 875 ..............	2922	115.0
D - Width
• Front axle - flange to flange ..............	1616	63.4
• Front axle - maximum tread width without extension ..............	2220	87.4
• Rear axle - flange to flange ..............	1552	61.1
• Maximum width for road travel	2550	100.4
E - Ground Clearance at Front Axle Steering Knuckle
- Maximum ground clearance with front tires with an SRI of:
• SRI 330 ............................	239	9.4
• SRI 390 ..............	299	11.8
• SRI 425 ..............	334	13.1
• SRI 450 ..............	358	14.1
F - Ground Clearance at Front Axle
- Maximum ground clearance with front tires with an SRI of:
• SRI 330 ..............	433	17.0
• SRI 390 ..............	493	19.4
• SRI 425 ..............	528	20.8
• SRI 450 ..............	553	21.8
G - Ground Clearance at Differential Housing with Drawbar Mount
- Maximum ground clearance with rear tires with an SRI of:
• SRI 625 ..............	273	10.71
• SRI 700 ..............	348	13.71
• SRI 725 ..............	373	14.71
• SRI 750 ..............	398	15.71
• SRI 775 ..............	423	16.71
• SRI 800 ..............	448	17.61
• SRI 825 ..............	473	18.61
• SRI 875 ..............	523	20.61

IMPORTANT: Ground clearance and height of the tractor depend on the tire manufacturer, tire pressure, ballast, trailer hitches, implements attached, etc.

Before driving through gates, tunnels, bridges etc., the height of the tractor must be checked.

All dimensions are valid for tractors whose tire combination has been selected so that the main frame is horizontally oriented.