Three-Piece Front Axle (Version 2) — Adjust the Fixed Fenders and Steering Stop - 750 (M50LD, M50 und M50HD) Part 2

IMPORTANT: Observe the following points in this section:

• “Notes on Adjusting the Fenders”

• “Three-Piece Front Axle (Version 2) — Overview of Axle Category and Axle Type”

• “Three-Piece Front Axle (Version 2) — Notes on Adjusting the Steering Stop”

• Refer to the “Tire Combinations” for the front wheels authorized for the tractor. See Section 80.

IMPORTANT: It must be ensured that the steering stops can be screwed in to a depth of at least 10 mm (0.4 in.).

• Adjust the steering stops to prevent the wheels from coming into contact with tractor components. See also “Prevent Front Wheel or Fender Contact with Tractor Components” in Section 80.

• Set the shut-off angle for the automatic engagement and disengagement of the front-wheel drive. See “Engage Front-Wheel Drive” in Section 50A.

IMPORTANT: For setting values for steering stop with two asterisks (**), the tread width and adjustment of the steering stop is possible only with steering stop kit AL225331.

NOTE: For front loader work, select a tread width between 175 - 195 cm (68.9 - 76.8 in.). The recommended tread widths are listed in the table and marked by an asterisk (*).

Three-Piece Front Axle (Version 2) — Adjust the Fixed Fenders and Steering Stop - 750 (M50LD, M50 und M50HD) Part 2
Tire Size	SRI	Tread width		Steering stop				Fixed fenders
				without front loader		with front loader		Installation positions					Width	Length	type
		[cm]	[in.]	[mm]	[in.]	[mm]	[in.]	I	II	III	IV	V	[mm]	[mm]
400/80R28 -R4	650	183*	72.0*	35	1.38	50	1.97	E-1-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		203	79.9	20	0.79	35	1.38	D-1-OUT
400/80R28 -R4	650	154	60.5	80	3.15	95**	3.74**	A-2-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		164	64.6	65	2.56	80	3.15	C-2-IN
		181*	71.4*	35	1.38	50	1.97	E-1-IN
		192	75.5	20	0.79	35	1.38	B-1-OUT
		194	76.3	20	0.79	35	1.38	C-1-OUT
		204	80.4	20	0.79	35	1.38	E-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
400/80R28 -R4	650	158	62.1	70	2.76	85**	3.35**	B-2-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		161	63.3	65	2.56	80	3.15	C-2-IN
		164	64.7	65	2.56	80	3.15	C-2-IN
		167	65.9	60	2.36	75	2.95	D-2-IN
		178	70.1	40	1.57	55	2.17	D-1-IN
		181	71.3	35	1.38	50	1.97	E-1-IN
		185	72.7	30	1.18	45	1.77	A-1-OUT
		188*	73.9*	30	1.18	45	1.77	A-1-OUT
		198	77.8	20	0.79	35	1.38	C-1-OUT
		201	79.0	20	0.79	35	1.38	D-1-OUT
		204	80.4	20	0.79	35	1.38	E-1-OUT
		207	81.6	20	0.79	35	1.38	E-1-OUT
		218	85.9	20	0.79	35	1.38	E-2-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		225	88.5	20	0.79	35	1.38	E-2-OUT
		228	89.7	20	0.79	35	1.38	E-2-OUT
400/80R28 -R4	650	157	61.9	70	2.76	85**	3.35**	B-2-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		167	65.9	60	2.36	75	2.95	D-2-IN
		178	69.9	40	1.57	55	2.17	D-1-IN
		188*	73.8*	30	1.18	45	1.77	A-1-OUT
		198	77.8	20	0.79	35	1.38	C-1-OUT
		208	81.9	20	0.79	35	1.38	E-1-OUT
		218	85.9	20	0.79	35	1.38	E-2-OUT
		228	89.9	20	0.79	35	1.38	E-2-OUT
420/70R24	600	183*	72.0*	30	1.18	45	1.77	E-2-IN	B4-D1	TIRE	UP	CTR	420	1440	REGULAR
		203	79.9	20	0.79	35	1.38	D-1-OUT
420/70R24	600	181*	71.4*	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
420/70R28	650	183*	72.0*	35	1.38	50	1.97	E-1-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		203	79.9	20	0.79	35	1.38	D-1-OUT
420/70R28	650	154	60.5	80	3.15	95**	3.74**	A-2-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		164	64.6	65	2.56	80	3.15	C-2-IN
		181*	71.4*	40	1.57	55	2.17	D-1-IN
		192	75.5	20	0.79	35	1.38	B-1-OUT
		194	76.3	20	0.79	35	1.38	B-1-OUT
		204	80.4	20	0.79	35	1.38	D-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
420/70R28	650	158	62.1	70	2.76	85**	3.35**	B-2-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		161	63.3	70	2.76	85**	3.35**	B-2-IN
		164	64.7	65	2.56	80	3.15	C-2-IN
		167	65.9	60	2.36	75	2.95	D-2-IN
		178	70.1	40	1.57	55	2.17	D-1-IN
		181	71.3	40	1.57	55	2.17	D-1-IN
		185	72.7	30	1.18	45	1.77	A-1-OUT
		188*	73.9*	30	1.18	45	1.77	A-1-OUT
		198	77.8	20	0.79	35	1.38	C-1-OUT
		201	79.0	20	0.79	35	1.38	D-1-OUT
		204	80.4	20	0.79	35	1.38	D-1-OUT
		207	81.6	20	0.79	35	1.38	E-1-OUT
		218	85.9	20	0.79	35	1.38	E-2-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		225	88.5	20	0.79	35	1.38	E-2-OUT
		228	89.7	20	0.79	35	1.38	E-2-OUT
420/70R28	650	157	61.9	70	2.76	85**	3.35**	B-2-IN	A5-C2	TIRE	UP	CTR	420	1440	REGULAR
		167	65.9	60	2.36	75	2.95	D-2-IN
		178	69.9	40	1.57	55	2.17	D-1-IN
		188*	73.8*	30	1.18	45	1.77	A-1-OUT
		198	77.8	20	0.79	35	1.38	C-1-OUT
		208	81.9	20	0.79	35	1.38	E-1-OUT
		218	85.9	20	0.79	35	1.38	E-2-OUT
		228	89.9	20	0.79	35	1.38	E-2-OUT
420/85R24	625	183*	72.0*	35	1.38	50	1.97	E-2-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
		203	79.8	20	0.79	35	1.38	D-1-OUT
420/85R24	625	181*	71.3*	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
420/85R28	675	183*	71.9*	60	2.36	75	2.95	E-1-IN	B5-D2	TIRE	UP	OUT	480	1440	LARGE
		203	79.9	35	1.38	50	1.97	D-1-OUT
420/85R28	675	154	60.5	90**	3.54**	95**	3.74**	A-2-IN	B5-D2	TIRE	UP	OUT	480	1440	LARGE
		164	64.6	80	3.15	95**	3.74**	C-2-IN
		181*	71.4*	65	2.56	80	3.15	D-1-IN
		192	75.5	45	1.77	60	2.36	B-1-OUT
		194	76.2	45	1.77	60	2.36	B-1-OUT
		204	80.3	35	1.38	50	1.97	D-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
420/85R28	675	157	61.8	85**	3.35**	95**	3.74**	B-2-IN	B5-D2	TIRE	UP	OUT	480	1440	LARGE
		167	65.8	75	2.95	90**	3.54**	D-2-IN
		177	69.9	65	2.56	80	3.15	D-1-IN
		187*	73.8*	50	1.97	65	2.56	A-1-OUT
		198	77.8	40	1.57	55	2.17	C-1-OUT
		208	81.8	25	0.98	40	1.57	E-1-OUT
		218	85.8	20	0.79	35	1.38	E-2-OUT
		228	89.9	20	0.79	35	1.38	E-2-OUT
420/85R28 -R2	700	183*	71.9*	60	2.36	75	2.95	E-1-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		203	79.9	35	1.38	50	1.97	D-1-OUT
420/85R28 -R2	700	154	60.5	95**	3.74**	95**	3.74**	A-2-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		164	64.5	80	3.15	95**	3.74**	C-2-IN
		181*	71.3*	65	2.56	80	3.15	D-1-IN
		192	75.4	50	1.97	65	2.56	B-1-OUT
		194	76.2	50	1.97	65	2.56	B-1-OUT
		204	80.3	35	1.38	50	1.97	D-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
420/85R28 -R2	700	157	61.8	85**	3.35**	95**	3.74**	B-2-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		167	65.8	75	2.95	90**	3.54**	D-2-IN
		177	69.8	65	2.56	80	3.15	D-1-IN
		187*	73.8*	55	2.17	70	2.76	A-1-OUT
		198	77.8	45	1.77	60	2.36	C-1-OUT
		208	81.8	30	1.18	45	1.77	E-1-OUT
		218	85.8	20	0.79	35	1.38	E-2-OUT
		228	89.8	20	0.79	35	1.38	E-2-OUT
420/85R30	700	184*	72.6*	60	2.36	75	2.95	E-1-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		201	79.2	35	1.38	50	1.97	D-1-OUT
420/85R30	700	161	63.3	85**	3.35**	95**	3.74**	B-2-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		171	67.4	75	2.95	90**	3.54**	D-2-IN
		174	68.5	70	2.76	85**	3.35**	E-2-IN
		184	72.6	60	2.36	75	2.95	E-1-IN
		201	79.0	35	1.38	50	1.97	D-1-OUT
		211	83.1	25	0.98	40	1.57	D-2-OUT
		214	84.2	25	0.98	40	1.57	D-2-OUT
		224	88.3	20	0.79	35	1.38	E-2-OUT
420/85R30	700	157	61.8	85**	3.35**	95**	3.74**	B-2-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		167	65.8	75	2.95	90**	3.54**	D-2-IN
		177	69.8	65	2.56	80	3.15	D-1-IN
		187*	73.8*	55	2.17	70	2.76	A-1-OUT
		198	77.8	45	1.77	60	2.36	C-1-OUT
		208	81.8	30	1.18	45	1.77	E-1-OUT
		218	85.8	20	0.79	35	1.38	E-2-OUT
		228	89.8	20	0.79	35	1.38	E-2-OUT
420/90R30	725	184*	72.5*	60	2.36	75	2.95	E-1-IN	A5-C2	TIRE	UP	OUT	480	1440	LARGE
		201	79.2	40	1.57	55	2.17	D-1-OUT
420/90R30	725	161	63.3	85**	3.35**	95**	3.74**	B-2-IN	A5-C2	TIRE	UP	OUT	480	1440	LARGE
		171	67.4	80	3.15	95**	3.74**	D-2-IN
		174	68.5	70	2.76	85**	3.35**	E-2-IN
		184	72.5	60	2.36	75	2.95	E-1-IN
		201	79.0	40	1.57	55	2.17	D-1-OUT
		211	83.1	30	1.18	45	1.77	D-2-OUT
		214	84.2	30	1.18	45	1.77	D-2-OUT
		224	88.3	25	0.98	40	1.57	E-2-OUT
420/90R30	725	157	61.8	95**	3.74**	95**	3.74**	A-2-IN	A5-C2	TIRE	UP	OUT	480	1440	LARGE
		167	65.8	80	3.15	95**	3.74**	C-2-IN
		177	69.8	70	2.76	85**	3.35**	E-2-IN
		187*	73.7*	60	2.36	75	2.95	A-1-OUT
		197	77.7	50	1.97	65	2.56	C-1-OUT
		208	81.8	35	1.38	50	1.97	E-1-OUT
		218	85.8	25	0.98	40	1.57	E-2-OUT
		228	89.8	25	0.98	40	1.57	E-2-OUT
440/80R24 -R4	625	183*	72.1*	40	1.57	55	2.17	E-2-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
		203	79.8	20	0.79	35	1.38	D-1-OUT
440/80R24 -R4	625	181*	71.3*	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
440/80R28 -R4	675	183*	71.9*	65	2.56	80	3.15	D-1-IN	B5-D2	TIRE	UP	OUT	480	1440	LARGE
		203	79.9	35	1.38	50	1.97	D-1-OUT
440/80R28 -R4	675	154	60.5	90**	3.54**	95**	3.74**	A-2-IN	B5-D2	TIRE	UP	OUT	480	1440	LARGE
		164	64.6	80	3.15	95**	3.74**	C-2-IN
		181*	71.4*	65	2.56	80	3.15	D-1-IN
		192	75.5	50	1.97	65	2.56	A-1-OUT
		194	76.2	45	1.77	60	2.36	B-1-OUT
		204	80.3	35	1.38	50	1.97	D-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
440/80R28 -R4	675	157	61.8	90**	3.54**	95**	3.74**	A-2-IN	B5-D2	TIRE	UP	OUT	480	1440	LARGE
		167	65.8	80	3.15	95**	3.74**	C-2-IN
		177	69.9	65	2.56	80	3.15	E-2-IN
		187*	73.8*	50	1.97	65	2.56	A-1-OUT
		198	77.8	40	1.57	55	2.17	C-1-OUT
		208	81.8	25	0.98	40	1.57	E-1-OUT
		218	85.8	20	0.79	35	1.38	E-2-OUT
		228	89.9	20	0.79	35	1.38	E-2-OUT
* Tread width setting on delivery. Recommended tread width for front loader operation. ** Tread width and adjustment of the steering stop is possible only with steering stop kit AL225331. *** No adjustment of steering stops and/or attachment of fenders possible.

Three-Piece Front Axle (Version 2) — Adjust the Fixed Fenders and Steering Stop - 750 (M50LD, M50 und M50HD) Part 2
Tire Size	SRI	Tread width		Steering stop				Fixed fenders
				without front loader		with front loader		Installation positions					Width	Length	type
		[cm]	[in.]	[mm]	[in.]	[mm]	[in.]	I	II	III	IV	V	[mm]	[mm]
480/65R24	600	183*	72.1*	40	1.57	55	2.17	E-2-IN	B4-D1	TIRE	UP	OUT	480	1440	REGULAR
		203	79.8	20	0.79	35	1.38	C-1-OUT
480/65R24	600	181*	71.4*	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
480/65R28	650	183*	71.9*	40	1.57	55	2.17	D-1-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
		203	80.0	20	0.79	35	1.38	C-1-OUT
480/65R28	650	154	60.5	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		164	64.6	70	2.76	85**	3.35**	B-2-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
		181*	71.4*	50	1.97	65	2.56	E-2-IN
		192	75.5	30	1.18	45	1.77	A-1-OUT
		194	76.3	30	1.18	45	1.77	A-1-OUT
		204	80.4	20	0.79	35	1.38	C-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
480/65R28	650	157	61.9	80	3.15	95**	3.74**	A-2-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
		167	65.9	70	2.76	85**	3.35**	B-2-IN
		178	69.9	60	2.36	75	2.95	D-2-IN
		188*	73.8*	40	1.57	55	2.17	D-1-IN
		198	77.8	20	0.79	35	1.38	B-1-OUT
		208	81.9	20	0.79	35	1.38	D-1-OUT
		218	85.9	20	0.79	35	1.38	D-2-OUT
		228	89.9	20	0.79	35	1.38	E-2-OUT
480/70R24	625	183*	72.1*	40	1.57	55	2.17	E-2-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
480/70R24	625	181*	71.3*	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		203	79.8	20	0.79	35	1.38	C-1-OUT	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
480/70R28	675	183*	71.9*	55	2.17	70	2.76	E-2-IN
		203	79.9	25	0.98	40	1.57	C-1-OUT	B6-D3	TIRE	DOWN	OUT	480	1440	LARGE
480/70R28	675	154	60.5	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		164	64.6	75	2.95	90**	3.54**	B-2-IN	B6-D3	TIRE	DOWN	OUT	480	1440	LARGE
		181*	71.4*	55	2.17	70	2.76	E-2-IN
		192	75.5	35	1.38	50	1.97	A-1-OUT
		194	76.2	35	1.38	50	1.97	A-1-OUT
		204	80.3	25	0.98	40	1.57	C-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
480/70R28	675	157	61.8	80	3.15	95**	3.74**	A-2-IN	B6-D3	TIRE	DOWN	OUT	480	1440	LARGE
		167	65.8	75	2.95	90**	3.54**	B-2-IN
		177	69.9	65	2.56	80	3.15	D-2-IN
		187*	73.8*	50	1.97	65	2.56	D-1-IN
		198	77.8	30	1.18	45	1.77	B-1-OUT
		208	81.8	20	0.79	35	1.38	D-1-OUT
		218	85.8	20	0.79	35	1.38	D-2-OUT
		228	89.9	20	0.79	35	1.38	E-2-OUT
480/70R30	700	184*	72.6*	65	2.56	80	3.15	D-1-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		201	79.2	45	1.77	60	2.36	C-1-OUT
480/70R30	700	161	63.3	95**	3.74**	95**	3.74**	A-2-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		171	67.4	80	3.15	95**	3.74**	C-2-IN
		174	68.5	75	2.95	90**	3.54**	D-2-IN
		184	72.6	65	2.56	80	3.15	D-1-IN
		201	79.0	50	1.97	65	2.56	B-1-OUT
		211	83.1	30	1.18	45	1.77	E-1-OUT
		214	84.2	30	1.18	45	1.77	E-1-OUT
		224	88.3	20	0.79	35	1.38	E-2-OUT
480/70R30	700	157	61.8	95**	3.74**	95**	3.74**	A-2-IN	B4-D1	TIRE	UP	OUT	480	1440	LARGE
		167	65.8	85**	3.35**	95**	3.74**	B-2-IN
		177	69.8	75	2.95	90**	3.54**	D-2-IN
		187*	73.8*	65	2.56	80	3.15	D-1-IN
		198	77.8	50	1.97	65	2.56	B-1-OUT
		208	81.8	35	1.38	50	1.97	D-1-OUT
		218	85.8	25	0.98	40	1.57	D-2-OUT
		228	89.8	20	0.79	35	1.38	E-2-OUT
540/65R24	625	181*	71.3*	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		203	79.8	35	1.38	50	1.97	A-1-OUT	A5-C2	TIRE	UP	CTR	540	1540	REGULAR
540/65R24	625	183*	72.1*	65	2.56	80	3.15	D-2-IN	A5-C2	TIRE	UP	CTR	540	1540	REGULAR
540/65R28	675	183*	71.9*	70	2.76	85**	3.35**	D-2-IN	B6-D3	TIRE	UP	CTR	540	1540	LARGE
		203	79.9	50	1.97	65	2.56	A-1-OUT	B6-D3	TIRE	UP	CTR	540	1540	LARGE
540/65R28	675	154	60.5	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		164	64.6	85**	3.35**	95**	3.74**	A-2-IN	B6-D3	TIRE	UP	CTR	540	1540	LARGE
		181*	71.4*	70	2.76	85**	3.35**	D-2-IN
		192	75.5	60	2.36	75	2.95	D-1-IN
		194	76.2	60	2.36	75	2.95	D-1-IN
		204	80.3	40	1.57	55	2.17	B-1-OUT
		221	87.1	25	0.98	40	1.57	E-1-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
540/65R28	675	157	61.8	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		167	65.8	85**	3.35**	95**	3.74**	A-2-IN	B6-D3	TIRE	UP	CTR	540	1540	LARGE
		177	69.9	75	2.95	90**	3.54**	C-2-IN
		187*	73.8*	65	2.56	80	3.15	E-2-IN
		198	77.8	50	1.97	65	2.56	E-1-IN
		208	81.8	40	1.57	55	2.17	B-1-OUT
		218	85.8	30	1.18	45	1.77	D-1-OUT
		228	89.9	20	0.79	35	1.38	D-2-OUT
540/65R30	700	184*	72.6*	70	2.76	85**	3.35**	D-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		201	79.2	50	1.97	65	2.56	A-1-OUT
540/65R30	700	161	63.3	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		171	67.4	85**	3.35**	95**	3.74**	B-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		174	68.5	85**	3.35**	95**	3.74**	B-2-IN
		184	72.6	70	2.76	85**	3.35**	D-2-IN
		201	79.0	50	1.97	65	2.56	A-1-OUT
		211	83.1	35	1.38	50	1.97	C-1-OUT
		214	84.2	30	1.18	45	1.77	D-1-OUT
		224	88.3	20	0.79	35	1.38	D-2-OUT
540/65R30	700	157	61.8	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		167	65.8	90**	3.54**	95**	3.74**	A-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		177	69.8	80	3.15	95**	3.74**	C-2-IN
		187*	73.8*	65	2.56	80	3.15	E-2-IN
		198	77.8	55	2.17	70	2.76	E-1-IN
		208	81.8	45	1.77	60	2.36	B-1-OUT
		218	85.8	30	1.18	45	1.77	D-1-OUT
		228	89.8	20	0.79	35	1.38	D-2-OUT
540/65R30 -R4	700	184*	72.6*	70	2.76	85**	3.35**	D-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		201	79.2	50	1.97	65	2.56	A-1-OUT
540/65R30 -R4	700	161	63.3	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		171	67.4	85**	3.35**	95**	3.74**	B-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		174	68.5	85**	3.35**	95**	3.74**	B-2-IN
		184	72.6	70	2.76	85**	3.35**	D-2-IN
		201	79.0	50	1.97	65	2.56	A-1-OUT
		211	83.1	35	1.38	50	1.97	C-1-OUT
		214	84.2	30	1.18	45	1.77	D-1-OUT
		224	88.3	20	0.79	35	1.38	D-2-OUT
540/65R30 -R4	700	157	61.8	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		167	65.8	90**	3.54**	95**	3.74**	A-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		177	69.8	80	3.15	95**	3.74**	C-2-IN
		187*	73.8*	65	2.56	80	3.15	E-2-IN
		198	77.8	55	2.17	70	2.76	E-1-IN
		208	81.8	45	1.77	60	2.36	B-1-OUT
		218	85.8	30	1.18	45	1.77	D-1-OUT
		228	89.8	20	0.79	35	1.38	D-2-OUT
600/65R28	700	184*	72.6*	80	3.15	95**	3.74**	C-2-IN	B4-D1	TIRE	UP	OUT	620	1560	LARGE
		201	79.2	60	2.36	75	2.95	E-1-IN
600/65R28	700	161	63.3	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		171	67.4	95**	3.74**	95**	3.74**	A-2-IN	B4-D1	TIRE	UP	OUT	620	1560	LARGE
		174	68.5	95**	3.74**	95**	3.74**	A-2-IN
		184	72.6	80	3.15	95**	3.74**	C-2-IN
		201	79.0	60	2.36	75	2.95	E-1-IN
		211	83.1	50	1.97	65	2.56	B-1-OUT
		214	84.2	45	1.77	60	2.36	C-1-OUT
		224	88.3	30	1.18	45	1.77	E-1-OUT
600/65R28	700	162	63.9	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		172	67.9	95**	3.74**	95**	3.74**	A-2-IN	B4-D1	TIRE	UP	OUT	620	1560	LARGE
		183	71.9	80	3.15	95**	3.74**	C-2-IN
		191*	75.1*	70	2.76	85**	3.35**	E-2-IN
		193	75.9	70	2.76	85**	3.35**	E-2-IN
		202	79.7	60	2.36	75	2.95	E-1-IN
		213	83.7	50	1.97	65	2.56	B-1-OUT
		223	87.7	30	1.18	45	1.77	E-1-OUT
VF 480/65R28	650	183*	71.9*	40	1.57	55	2.17	D-1-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
		203	80.0	20	0.79	35	1.38	C-1-OUT
VF 480/65R28	650	154	60.5	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		164	64.6	70	2.76	85**	3.35**	B-2-IN	A5-C2	TIRE	UP	OUT	480	1440	REGULAR
		181*	71.4*	50	1.97	65	2.56	E-2-IN
		192	75.5	30	1.18	45	1.77	A-1-OUT
		194	76.3	30	1.18	45	1.77	A-1-OUT
		204	80.4	20	0.79	35	1.38	C-1-OUT
		221	87.1	20	0.79	35	1.38	E-2-OUT
		232	91.2	20	0.79	35	1.38	E-2-OUT
VF 520/60R28	650	185*	72.7*	55	2.17	70	2.76	E-2-IN	A5-C2	TIRE	UP	CTR	540	1540	REGULAR
		201	79.3	30	1.18	45	1.77	B-1-OUT
VF 540/65R28	675	184*	72.6*	70	2.76	85**	3.35**	D-2-IN	B6-D3	TIRE	UP	CTR	540	1540	LARGE
		201	79.2	50	1.97	65	2.56	A-1-OUT
VF 540/65R28	675	161	63.3	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		171	67.4	80	3.15	95**	3.74**	B-2-IN	B6-D3	TIRE	UP	CTR	540	1540	LARGE
		174	68.5	80	3.15	95**	3.74**	B-2-IN
		184	72.6	70	2.76	85**	3.35**	D-2-IN
		201	79.1	50	1.97	65	2.56	A-1-OUT
		211	83.2	35	1.38	50	1.97	C-1-OUT
		214	84.3	30	1.18	45	1.77	D-1-OUT
		224	88.4	20	0.79	35	1.38	D-2-OUT
VF 540/65R30	700	184*	72.6*	70	2.76	85**	3.35**	D-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		201	79.2	50	1.97	65	2.56	A-1-OUT
VF 540/65R30	700	161	63.3	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***	—***
		171	67.4	85**	3.35**	95**	3.74**	B-2-IN	B5-D2	TIRE	UP	CTR	540	1540	LARGE
		174	68.5	85**	3.35**	95**	3.74**	B-2-IN
		184	72.6	70	2.76	85**	3.35**	D-2-IN
		201	79.0	50	1.97	65	2.56	A-1-OUT
		211	83.1	35	1.38	50	1.97	C-1-OUT
		214	84.2	30	1.18	45	1.77	D-1-OUT
		224	88.3	20	0.79	35	1.38	D-2-OUT
VF 600/60R28	675	184*	72.6*	75	2.95	90**	3.54**	D-2-IN	B5-D2	TIRE	UP	OUT	620	1560	LARGE
		201	79.2	60	2.36	75	2.95	E-1-IN
VF 600/60R30	700	184*	72.6*	75	2.95	90**	3.54**	D-2-IN	B4-D1	TIRE	UP	OUT	620	1560	LARGE
		201	79.2	60	2.36	75	2.95	E-1-IN
VF 600/65R28	700	184*	72.6*	80	3.15	95**	3.74**	C-2-IN	B4-D1	TIRE	UP	OUT	620	1560	LARGE
		201	79.2	60	2.36	75	2.95	E-1-IN
* Tread width setting on delivery. Recommended tread width for front loader operation. ** Tread width and adjustment of the steering stop is possible only with steering stop kit AL225331. *** No adjustment of steering stops and/or attachment of fenders possible.