Rear Hitch - Driving under Load with Mounted Implement

IMPORTANT: The mass of the implement may be such that the implement moves up and down slightly even when the transport lock is on and hitch dampening is active.

Always raise the implement high enough to provide sufficient clearance between the implement and the road surface.

LX234780-UN-25NOV15

IMPORTANT: Always engage the hitch lock / hitch dampening function before driving the tractor!

Raise implement completely; to do so, move the depth control beyond 0 to the stop (lock symbol) into the transport position (A). The hitch is locked.

Be sure to consider other points:

• Do not exceed the maximum trailer load (see table).
• Secure coupler hooks against unintentional opening (see description in this section).
• Use anti-twist trailer hitches and observe manufacturer's instructions.
• Raise draft links only so high until they are aligned horizontally.

  
  LX341502-UN-11JUN18

---

Permissible towable load when transporting an implement with its own chassis

Rear hitch with CAT II Models 6095MC/RC to 6130M/R Maximum towable load 10000 kg (22046 lb.)*

Rear hitch with CAT III Models 6145M to 6195M or 6145R to 6250R Maximum towable load 12000 kg (26455 lb.)*

* Observe the maximum permissible towable loads in Section 500A. If lower values ​​are given there, those specifications are binding.