|
□
Access the diagnostic trouble codes and rectify fault. Then
delete the diagnostic trouble codes
□
Check the movement inhibitor
□
PTO actuation - Check safety device
|
□
Fuse box - Visually inspect and clean
□
Check lights
□
Lights - Check settings of headlights
□
Check that all accessible ground cables are secure
|
|
□
Wheels - Front and rear wheels
□
Wheels - Wheel disk on rim
□
Wheels - Wheel weights
□
Wheels - Dual wheel attachment
|
□
Adjustable front axle - Axle bolts
□
Swinging drawbar
□
Front hitch - Mounting frame
□
Front loader mounting frame
|
|
□
Engine - Check drive belt for wear (rubbing)
□
Coolant level
□
Air intake hoses - Check for leaks
□
Front-wheel drive axle - Axle housing, oil level
□
Front-wheel drive axle - Final drives without brake, oil level
□
Transmission/hydraulic system - Oil level
□
Check leak-off oil containers (if equipped)
□
Inspect seat belt for damage and ensure proper working order.
|
□
Cab - Check all rubber seals of the doors and windows as well
as the cable feedthroughs for proper seating, wear, and brittleness.
□
Cab - Check function of all closing mechanisms of the doors
and windows.
□
Brake system - Bleed and check
□
Foot brake - Operational check
□
Park lock - Operational check
□
All trailer hitches
|
|
□
Fuel filter
□
Engine oil and engine oil filter²
□
Hydraulic oil filter
□
Transmission oil filter
|
□
Front PTO - Oil filter
□
Front-wheel drive axle - Final drives with brake, oil
□
Cab - Activated carbon filter (if equipped)4
|
|
□
Front hitch - Cylinder and three-point hitch
□
Adjustable front axle - Lubrication points
□
Front-wheel drive axle - Pivot bearing
□
Front-wheel drive axle - All universal joints including universal-jointed
shaft
□
Front axle suspension - Hydraulic cylinder
□
Pivoting fenders (only with two-piece front axle)
|
□
Lubricate universal-jointed shaft between engine and transmission
(if equipped)
□
Three-point hitch - Lift links and rockshaft
□
Rear axle bearings
□
Rear PTO - PTO stub shaft support (PTO stub shaft, reversible)
|