Three-Piece Front Axle (Version 2) — Adjust the Pivoting Fenders and Steering Stop - 730, 733 and 735

IMPORTANT: Observe the following points in this section:

• “Notes on Adjusting the Fenders”

• “Three-Piece Front Axle (Version 2) — Notes on Adjusting the Steering Stop”

• Refer to the “Tire Combinations” for the front wheels authorized for the tractor. See Section 80.

IMPORTANT: It must be ensured that the steering stops can be screwed in to a depth of at least 10 mm (0.4 in.).

• Adjust the steering stops to prevent the wheels from coming into contact with tractor components. See also “Prevent Front Wheel or Fender Contact with Tractor Components” in Section 80.

• Set the shut-off angle for the automatic engagement and disengagement of the front-wheel drive. See “Engage Front-Wheel Drive” in Section 50A.

NOTE: For front loader work, select a tread width between 175 - 185 cm (68.9 - 72.8 in.). The recommended tread widths are listed in the table and marked by an asterisk (*).

Three-Piece Front Axle (Version 2) — Adjust the Pivoting Fenders and Steering Stop - 730, 733 and 735
Tire Size	SRI	Tread width		Steering stop				Pivoting fenders
				without front loader		with front loader		Installation positions
		[cm]	[in.]	[mm]	[in.]	[mm]	[in.]	I	II	III	IV	V
13.6-38 -R2	775	152	59.7	—**	—**	—**	—**	—**	—**	—**	—**	—**
		155	60.9	—**	—**	—**	—**	—**
		159	62.4	—**	—**	—**	—**	—**
		162	63.6	—**	—**	—**	—**	—**
		171	67.4	95	3.74	95	3.74	—**
		174	68.6	—**	—**	—**	—**	—**
		178	70.1	—**	—**	—**	—**	—**
		181*	71.3*	95	3.74	95	3.74	—**
		192	75.5	—**	—**	—**	—**	—**
		195	76.7	—**	—**	—**	—**	—**
		199	78.1	—**	—**	—**	—**	—**
		202	79.3	—**	—**	—**	—**	—**
13.6-38 -R2	775	159	62.5	—**	—**	—**	—**	—**	—**	—**	—**	—**
		162	63.7	—**	—**	—**	—**	—**
		178	70.2	—**	—**	—**	—**	—**
		181*	71.4*	95	3.74	95	3.74	—**
		199	78.2	—**	—**	—**	—**	—**
		202	79.4	—**	—**	—**	—**	—**
270/80R36	650	152	59.9	65	2.56	80	3.15	A-1-OUT	A4-C1	TIRE	UP	IN
		155	61.1	60	2.36	75	2.95	B-1-OUT
		159	62.6	55	2.17	70	2.76	B-1-OUT
		162	63.8	45	1.77	60	2.36	C-1-OUT
		172	67.6	30	1.18	45	1.77	E-1-OUT
		175	68.8	30	1.18	45	1.77	D-2-OUT
		179	70.4	30	1.18	45	1.77	D-2-OUT
		182*	71.5*	30	1.18	45	1.77	E-2-OUT
		192	75.6	30	1.18	45	1.77	E-2-OUT
		195	76.8	30	1.18	45	1.77	E-2-OUT
		199	78.4	30	1.18	45	1.77	E-2-OUT
		202	79.6	30	1.18	45	1.77	E-2-OUT
270/95R32	625	152	59.9	55	2.17	70	2.76	A-1-OUT	A4-C1	TIRE	UP	IN
		155	61.1	55	2.17	70	2.76	B-1-OUT
		159	62.7	45	1.77	60	2.36	B-1-OUT
		162	63.9	40	1.57	55	2.17	C-1-OUT
		172	67.6	30	1.18	45	1.77	E-1-OUT
		175	68.8	30	1.18	45	1.77	D-2-OUT
		179	70.4	30	1.18	45	1.77	D-2-OUT
		182*	71.6*	30	1.18	45	1.77	E-2-OUT
		192	75.7	30	1.18	45	1.77	E-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		199	78.4	30	1.18	45	1.77	E-2-OUT
		202	79.6	30	1.18	45	1.77	E-2-OUT
280/85R28	575	153	60.2	—**	—**	—**	—**	A-1-OUT	B5-D2	TIRE	UP	IN
		181*	71.4*	30	1.18	45	1.77	E-2-OUT
280/85R28	575	152	60.0	—**	—**	—**	—**	A-1-OUT	B5-D2	TIRE	UP	IN
		155	61.2	—**	—**	—**	—**	B-1-OUT
		159	62.4	—**	—**	—**	—**	B-1-OUT
		162	63.6	—**	—**	—**	—**	C-1-OUT
		172	67.7	—**	—**	—**	—**	E-1-OUT
		175	68.9	—**	—**	—**	—**	E-1-OUT
		178	70.2	—**	—**	—**	—**	D-2-OUT
		181*	71.3*	30	1.18	45	1.77	E-2-OUT
		192	75.7	—**	—**	—**	—**	E-2-OUT
		195	76.9	—**	—**	—**	—**	E-2-OUT
		199	78.2	—**	—**	—**	—**	E-2-OUT
		202	79.4	—**	—**	—**	—**	E-2-OUT
320/85R24	550	153	60.0	40	1.57	55	2.17	E-1-IN	B5-D2	TIRE	UP	IN
		156	61.2	35	1.38	50	1.97	A-1-OUT
		159	62.5	30	1.18	45	1.77	A-1-OUT
		162	63.7	30	1.18	45	1.77	B-1-OUT
		172	67.8	30	1.18	45	1.77	D-1-OUT
		175	68.9	30	1.18	45	1.77	E-1-OUT
		178	70.2	30	1.18	45	1.77	E-1-OUT
		181*	71.4*	30	1.18	45	1.77	D-2-OUT
		193	75.8	30	1.18	45	1.77	E-2-OUT
		196	77.0	30	1.18	45	1.77	E-2-OUT
		199	78.2	30	1.18	45	1.77	E-2-OUT
		202	79.4	30	1.18	45	1.77	E-2-OUT
320/85R28	600	153	60.1	65	2.56	80	3.15	E-1-IN	A5-C2	TIRE	UP	IN
		181*	71.4*	30	1.18	45	1.77	D-2-OUT
320/85R28	600	152	60.0	70	2.76	85	3.35	E-1-IN	A5-C2	TIRE	UP	IN
		155	61.1	65	2.56	80	3.15	A-1-OUT
		159	62.4	55	2.17	70	2.76	A-1-OUT
		162	63.6	50	1.97	65	2.56	B-1-OUT
		172	67.7	30	1.18	45	1.77	D-1-OUT
		174.9	68.9	30	1.18	45	1.77	E-1-OUT
		178	70.1	30	1.18	45	1.77	E-1-OUT
		181*	71.3*	30	1.18	45	1.77	D-2-OUT
		192	75.7	30	1.18	45	1.77	E-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		199	78.1	30	1.18	45	1.77	E-2-OUT
		202	79.3	30	1.18	45	1.77	E-2-OUT
340/85R24	575	152.6	60.1	50	1.97	65	2.56	D-1-IN	B5-D2	TIRE	UP	IN
		181*	71.4*	30	1.18	45	1.77	E-1-OUT
340/85R24	575	152	60.0	50	1.97	65	2.56	D-1-IN	B5-D2	TIRE	UP	IN
		155	61.2	45	1.77	60	2.36	E-1-IN
		159	62.4	35	1.38	50	1.97	A-1-OUT
		162	63.6	30	1.18	45	1.77	B-1-OUT
		172	67.7	30	1.18	45	1.77	D-1-OUT
		175	68.9	30	1.18	45	1.77	D-1-OUT
		178	70.2	30	1.18	45	1.77	E-1-OUT
		181*	71.3*	30	1.18	45	1.77	E-1-OUT
		192	75.7	30	1.18	45	1.77	E-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		199	78.2	30	1.18	45	1.77	E-2-OUT
		202	79.4	30	1.18	45	1.77	E-2-OUT
340/85R28	625	153	60.1	70	2.76	85	3.35	D-1-IN	A5-C2	TIRE	UP	IN
		181*	71.3*	30	1.18	45	1.77	E-1-OUT
340/85R28	625	152	59.9	75	2.95	90	3.54	D-1-IN	A5-C2	TIRE	UP	IN
		155	61.1	70	2.76	85	3.35	E-1-IN
		158	62.4	65	2.56	80	3.15	A-1-OUT
		161	63.5	55	2.17	70	2.76	B-1-OUT
		172	67.6	35	1.38	50	1.97	D-1-OUT
		175	68.8	35	1.38	50	1.97	D-1-OUT
		178	70.1	30	1.18	45	1.77	E-1-OUT
		181*	71.3*	30	1.18	45	1.77	E-1-OUT
		192	75.7	30	1.18	45	1.77	E-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		198	78.1	30	1.18	45	1.77	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
340/85R38	750	152	59.8	95	3.74	95	3.74	D-1-IN	A4-C1	TIRE	UP	IN
		155	60.9	95	3.74	95	3.74	E-1-IN
		159	62.4	95	3.74	95	3.74	A-1-OUT
		162	63.6	95	3.74	95	3.74	B-1-OUT
		171	67.5	90	3.54	95	3.74	D-1-OUT
		174	68.7	85	3.35	95	3.74	D-1-OUT
		178	70.2	80	3.15	95	3.74	E-1-OUT
		181*	71.3*	75	2.95	90	3.54	D-2-OUT
		192	75.5	65	2.56	80	3.15	E-2-OUT
		195	76.7	60	2.36	75	2.95	E-2-OUT
		199	78.2	55	2.17	70	2.76	E-2-OUT
		202	79.4	45	1.77	60	2.36	E-2-OUT
340/85R38	750	159	62.5	95	3.74	95	3.74	A-1-OUT	A4-C1	TIRE	UP	IN
		162	63.7	95	3.74	95	3.74	B-1-OUT
		178	70.2	80	3.15	95	3.74	E-1-OUT
		181*	71.4*	75	2.95	90	3.54	D-2-OUT
		199	78.3	55	2.17	70	2.76	E-2-OUT
		202	79.4	45	1.77	60	2.36	E-2-OUT
360/70R24	550	153	60.1	45	1.77	60	2.36	D-1-IN	B5-D2	TIRE	UP	IN
		182*	71.5*	30	1.18	45	1.77	E-1-OUT
360/70R24	550	153	60.0	50	1.97	65	2.56	D-1-IN	B5-D2	TIRE	UP	IN
		156	61.2	40	1.57	55	2.17	E-1-IN
		159	62.5	35	1.38	50	1.97	A-1-OUT
		162	63.7	30	1.18	45	1.77	A-1-OUT
		172	67.8	30	1.18	45	1.77	C-1-OUT
		175	68.9	30	1.18	45	1.77	D-1-OUT
		178	70.2	30	1.18	45	1.77	E-1-OUT
		181*	71.4*	30	1.18	45	1.77	E-1-OUT
		193	75.8	30	1.18	45	1.77	E-2-OUT
		196	77.0	30	1.18	45	1.77	E-2-OUT
		199	78.2	30	1.18	45	1.77	E-2-OUT
		202	79.4	30	1.18	45	1.77	E-2-OUT
380/70R24	575	153	60.1	50	1.97	65	2.56	D-1-IN	B5-D2	TIRE	UP	CTR
		181*	71.4*	30	1.18	45	1.77	E-1-OUT
380/70R24	575	152	60.0	50	1.97	65	2.56	D-1-IN	B5-D2	TIRE	UP	CTR
		155	61.2	45	1.77	60	2.36	D-1-IN
		159	62.4	35	1.38	50	1.97	E-1-IN
		162	63.6	30	1.18	45	1.77	A-1-OUT
		172	67.7	30	1.18	45	1.77	C-1-OUT
		175	68.9	30	1.18	45	1.77	C-1-OUT
		178	70.2	30	1.18	45	1.77	D-1-OUT
		181*	71.3*	30	1.18	45	1.77	E-1-OUT
		192	75.7	30	1.18	45	1.77	E-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		199	78.2	30	1.18	45	1.77	E-2-OUT
		202	79.4	30	1.18	45	1.77	E-2-OUT
380/70R28	625	153	60.1	75	2.95	90	3.54	D-1-IN	A5-C2	TIRE	UP	CTR
		181*	71.3*	30	1.18	45	1.77	E-1-OUT
380/70R28	625	152	59.9	80	3.15	95	3.74	D-1-IN	A5-C2	TIRE	UP	CTR
		155	61.1	70	2.76	85	3.35	D-1-IN
		158	62.4	65	2.56	80	3.15	E-1-IN
		161	63.5	60	2.36	75	2.95	A-1-OUT
		172	67.6	40	1.57	55	2.17	C-1-OUT
		175	68.8	35	1.38	50	1.97	C-1-OUT
		178	70.1	30	1.18	45	1.77	D-1-OUT
		181*	71.3*	30	1.18	45	1.77	E-1-OUT
		192	75.7	30	1.18	45	1.77	E-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		198	78.1	30	1.18	45	1.77	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
380/85R24	600	152	60.0	80	3.15	95	3.74	D-1-IN	A5-C2	TIRE	UP	CTR
		181*	71.4*	30	1.18	45	1.77	E-1-OUT
380/85R24	600	152	60.0	80	3.15	95	3.74	D-1-IN	A5-C2	TIRE	UP	CTR
		155	61.1	75	2.95	90	3.54	D-1-IN
		1595	62.4	65	2.56	80	3.15	E-1-IN
		162	63.6	60	2.36	75	2.95	A-1-OUT
		172	67.7	40	1.57	55	2.17	C-1-OUT
		175	68.9	35	1.38	50	1.97	C-1-OUT
		178	70.1	30	1.18	45	1.77	D-1-OUT
		181*	71.3*	30	1.18	45	1.77	E-1-OUT
		192	75.7	30	1.18	45	1.77	E-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		199	78.1	30	1.18	45	1.77	E-2-OUT
		202	79.3	30	1.18	45	1.77	E-2-OUT
* Tread width setting on delivery. Recommended tread width for front loader operation. ** No adjustment of steering stops and/or attachment of fenders possible.

Three-Piece Front Axle (Version 2) — Adjust the Pivoting Fenders and Steering Stop - 730, 733 and 735
Tire Size	SRI	Tread width		Steering stop				Pivoting fenders
				without front loader		with front loader		Installation positions
		[cm]	[in.]	[mm]	[in.]	[mm]	[in.]	I	II	III	IV	V
380/85R28	650	1535	60.0	80	3.15	95	3.74	D-1-IN	A4-C1	TIRE	UP	CTR
		181*	71.3*	40	1.57	55	2.17	E-1-OUT
380/85R28	650	152	59.9	80	3.15	95	3.74	D-1-IN	A4-C1	TIRE	UP	CTR
		155	61.1	80	3.15	95	3.74	D-1-IN
		158	62.3	70	2.76	85	3.35	E-1-IN
		161	63.5	65	2.56	80	3.15	A-1-OUT
		172	67.6	50	1.97	65	2.56	C-1-OUT
		175	68.8	50	1.97	65	2.56	C-1-OUT
		178	70.0	45	1.77	60	2.36	D-1-OUT
		181*	71.2*	40	1.57	55	2.17	E-1-OUT
		192	75.6	30	1.18	45	1.77	E-2-OUT
		195	76.8	30	1.18	45	1.77	E-2-OUT
		198	78.1	30	1.18	45	1.77	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
380/85R30	675	152	59.8	95	3.74	95	3.74	E-2-IN	B5-D2	TIRE	UP	CTR
		155	61.0	95	3.74	95	3.74	D-1-IN
		158	62.4	95	3.74	95	3.74	E-1-IN
		161	63.5	95	3.74	95	3.74	A-1-OUT
		172	67.6	85	3.35	95	3.74	C-1-OUT
		175	68.7	80	3.15	95	3.74	C-1-OUT
		178	70.1	75	2.95	90	3.54	D-1-OUT
		181*	71.3*	70	2.76	85	3.35	E-1-OUT
		192	75.6	55	2.17	70	2.76	E-2-OUT
		195	76.8	50	1.97	65	2.56	E-2-OUT
		198	78.1	40	1.57	55	2.17	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
400/80R24 -R4	600	153	60.0	80	3.15	95	3.74	E-2-IN	A5-C2	TIRE	UP	CTR
		181*	71.4*	30	1.18	45	1.77	D-1-OUT
400/80R24 -R4	600	152	60.0	80	3.15	95	3.74	E-2-IN	A5-C2	TIRE	UP	CTR
		155	61.1	75	2.95	90	3.54	D-1-IN
		159	62.4	70	2.76	85	3.35	D-1-IN
		162	63.6	65	2.56	80	3.15	E-1-IN
		172	67.7	45	1.77	60	2.36	B-1-OUT
		178	68.9	40	1.57	55	2.17	C-1-OUT
		178	70.1	35	1.38	50	1.97	D-1-OUT
		181*	71.3*	30	1.18	45	1.77	D-1-OUT
		192	75.7	30	1.18	45	1.77	D-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		199	78.1	30	1.18	45	1.77	E-2-OUT
		202	79.3	30	1.18	45	1.77	E-2-OUT
400/80R28 -R4	650	152	60.0	85	3.35	95	3.74	E-2-IN	A4-C1	TIRE	UP	CTR
		181*	71.3*	35	1.38	50	1.97	D-1-OUT
400/80R28 -R4	650	152	59.9	85	3.35	95	3.74	E-2-IN	A4-C1	TIRE	UP	CTR
		155	61.1	80	3.15	95	3.74	D-1-IN
		158	62.3	75	2.95	90	3.54	D-1-IN
		161	63.5	70	2.76	85	3.35	E-1-IN
		172	67.6	55	2.17	70	2.76	B-1-OUT
		175	68.8	50	1.97	65	2.56	C-1-OUT
		177.9	70.0	40	1.57	55	2.17	D-1-OUT
		181*	71.2*	35	1.38	50	1.97	D-1-OUT
		192	75.6	30	1.18	45	1.77	D-2-OUT
		195	76.8	30	1.18	45	1.77	E-2-OUT
		198	78.1	30	1.18	45	1.77	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
420/65R24 -R4	550	153	60.1	60	2.36	75	2.95	E-2-IN	B5-D2	TIRE	UP	CTR
		182*	71.5*	30	1.18	45	1.77	D-1-OUT
420/65R24 -R4	550	153	60.0	60	2.36	75	2.95	E-2-IN	B5-D2	TIRE	UP	CTR
		156	61.2	55	2.17	70	2.76	E-2-IN
		159	62.5	45	1.77	60	2.36	D-1-IN
		162	63.7	40	1.57	55	2.17	E-1-IN
		172	67.8	30	1.18	45	1.77	B-1-OUT
		175	68.9	30	1.18	45	1.77	C-1-OUT
		178	70.2	30	1.18	45	1.77	C-1-OUT
		181*	71.4*	30	1.18	45	1.77	D-1-OUT
		193	75.8	30	1.18	45	1.77	D-2-OUT
		196	77.0	30	1.18	45	1.77	E-2-OUT
		199	78.2	30	1.18	45	1.77	E-2-OUT
		202	79.4	30	1.18	45	1.77	E-2-OUT
420/70R24	600	153	60.0	75	2.95	90	3.54	E-2-IN	A6-C3	TIRE	UP	CTR
		181*	71.4*	30	1.18	45	1.77	D-1-OUT
420/70R24	600	152	60.0	75	2.95	90	3.54	E-2-IN	A6-C3	TIRE	UP	CTR
		155	61.1	65	2.56	80	3.15	E-2-IN
		159	62.4	55	2.17	70	2.76	D-1-IN
		162	63.6	50	1.97	65	2.56	E-1-IN
		172	67.7	30	1.18	45	1.77	B-1-OUT
		175	68.9	30	1.18	45	1.77	C-1-OUT
		178	70.1	30	1.18	45	1.77	C-1-OUT
		181*	71.3*	30	1.18	45	1.77	D-1-OUT
		192	75.7	30	1.18	45	1.77	D-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		199	78.1	30	1.18	45	1.77	E-2-OUT
		202	79.3	30	1.18	45	1.77	E-2-OUT
420/70R28	650	153	60.0	85	3.35	95	3.74	E-2-IN	A4-C1	TIRE	UP	CTR
		181*	71.3*	35	1.38	50	1.97	D-1-OUT
420/70R28	650	152	59.9	85	3.35	95	3.74	E-2-IN	A4-C1	TIRE	UP	CTR
		155	61.1	80	3.15	95	3.74	E-2-IN
		158	62.3	75	2.95	90	3.54	D-1-IN
		161	63.5	70	2.76	85	3.35	E-1-IN
		172	67.6	55	2.17	70	2.76	B-1-OUT
		175	68.8	45	1.77	60	2.36	C-1-OUT
		178	70.0	40	1.57	55	2.17	C-1-OUT
		181*	71.2*	35	1.38	50	1.97	D-1-OUT
		192	75.6	30	1.18	45	1.77	D-2-OUT
		195	76.8	30	1.18	45	1.77	E-2-OUT
		198	78.1	30	1.18	45	1.77	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
420/85R24	625	152	60.0	80	3.15	95	3.74	E-2-IN	A4-C1	TIRE	UP	OUT
		181*	71.3*	35	1.38	50	1.97	D-1-OUT
420/85R24	625	152	59.9	80	3.15	95	3.74	E-2-IN	A4-C1	TIRE	UP	OUT
		155	61.1	75	2.95	90	3.54	E-2-IN
		158	62.4	70	2.76	85	3.35	D-1-IN
		161	63.5	65	2.56	80	3.15	E-1-IN
		172	67.6	45	1.77	60	2.36	B-1-OUT
		175	68.8	40	1.57	55	2.17	C-1-OUT
		178	70.1	35	1.38	50	1.97	C-1-OUT
		181*	71.3*	35	1.38	50	1.97	D-1-OUT
		192	75.7	30	1.18	45	1.77	D-2-OUT
		195	76.9	30	1.18	45	1.77	E-2-OUT
		198	78.1	30	1.18	45	1.77	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
440/65R24	575	153	60.1	70	2.76	85	3.35	D-2-IN	B5-D2	TIRE	UP	OUT
		181*	71.4*	30	1.18	45	1.77	C-1-OUT
440/65R24	575	152	60.0	70	2.76	85	3.35	D-2-IN	B5-D2	TIRE	UP	OUT
		155	61.2	65	2.56	80	3.15	E-2-IN
		159	62.4	55	2.17	70	2.76	D-1-IN
		162	63.6	50	1.97	65	2.56	D-1-IN
		172	67.7	30	1.18	45	1.77	B-1-OUT
		175	68.9	30	1.18	45	1.77	B-1-OUT
		178	70.2	30	1.18	45	1.77	C-1-OUT
		181*	71.3*	30	1.18	45	1.77	C-1-OUT
		192	75.7	30	1.18	45	1.77	D-2-OUT
		195	76.9	30	1.18	45	1.77	D-2-OUT
		199	78.2	30	1.18	45	1.77	E-2-OUT
		202	79.4	30	1.18	45	1.77	E-2-OUT
440/80R24 -R4	625	152	60.0	85	3.35	95	3.74	D-2-IN	A4-C1	TIRE	UP	OUT
		181*	71.3*	40	1.57	55	2.17	C-1-OUT
440/80R24 -R4	625	152	59.9	85	3.35	95	3.74	D-2-IN	A4-C1	TIRE	UP	OUT
		155	61.1	85	3.35	95	3.74	E-2-IN
		158	62.4	80	3.15	95	3.74	E-2-IN
		161	63.5	75	2.95	90	3.54	D-1-IN
		172	67.6	55	2.17	70	2.76	B-1-OUT
		175	68.8	55	2.17	70	2.76	B-1-OUT
		178	70.1	45	1.77	60	2.36	C-1-OUT
		181*	71.3*	40	1.57	55	2.17	C-1-OUT
		192	75.7	30	1.18	45	1.77	D-2-OUT
		195	76.9	30	1.18	45	1.77	D-2-OUT
		198	78.1	30	1.18	45	1.77	E-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
480/65R24	600	153	60.0	80	3.15	95	3.74	C-2-IN	B4-D1	TIRE	UP	OUT
		181*	71.4*	35	1.38	50	1.97	C-1-OUT
480/65R24	600	152	60.0	80	3.15	95	3.74	C-2-IN	B4-D1	TIRE	UP	OUT
		155	61.1	75	2.95	90	3.54	D-2-IN
		159	62.4	80	3.15	95	3.74	E-2-IN
		162	63.6	75	2.95	90	3.54	E-2-IN
		172	67.7	55	2.17	70	2.76	A-1-OUT
		175	68.9	50	1.97	65	2.56	A-1-OUT
		178	70.1	40	1.57	55	2.17	B-1-OUT
		181*	71.3*	35	1.38	50	1.97	C-1-OUT
		192	75.7	30	1.18	45	1.77	E-1-OUT
		195	76.9	30	1.18	45	1.77	E-1-OUT
		199	78.1	30	1.18	45	1.77	D-2-OUT
		202	79.3	30	1.18	45	1.77	E-2-OUT
480/65R28	650	152	60.1	90	3.54	95	3.74	D-2-IN	A4-C1	TIRE	UP	OUT
		181*	71.3*	50	1.97	65	2.56	C-1-OUT
480/65R28	650	152	59.9	90	3.54	95	3.74	C-2-IN	A4-C1	TIRE	UP	OUT
		155	61.1	85	3.35	95	3.74	D-2-IN
		158	62.3	90	3.54	95	3.74	E-2-IN
		161	63.5	80	3.15	95	3.74	E-2-IN
		172	67.6	65	2.56	80	3.15	A-1-OUT
		175	68.8	60	2.36	75	2.95	A-1-OUT
		178	70.0	55	2.17	70	2.76	B-1-OUT
		181*	71.2*	50	1.97	65	2.56	C-1-OUT
		192	75.6	30	1.18	45	1.77	E-1-OUT
		195	76.8	30	1.18	45	1.77	E-1-OUT
		198	78.1	30	1.18	45	1.77	D-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
480/70R24	625	152	60.0	85	3.35	95	3.74	C-2-IN	A4-C1	TIRE	UP	OUT
		181*	71.3*	45	1.77	60	2.36	C-1-OUT
480/70R24	625	152	59.9	90	3.54	95	3.74	C-2-IN	A4-C1	TIRE	UP	OUT
		155	61.1	80	3.15	95	3.74	D-2-IN
		158	62.4	85	3.35	95	3.74	E-2-IN
		161	63.5	80	3.15	95	3.74	E-2-IN
		172	67.6	65	2.56	80	3.15	A-1-OUT
		175	68.8	55	2.17	70	2.76	A-1-OUT
		178	70.1	50	1.97	65	2.56	B-1-OUT
		181*	71.3*	—**	—**	—**	—**	C-1-OUT
		192	75.7	—**	—**	—**	—**	E-1-OUT
		195	76.9	—**	—**	—**	—**	E-1-OUT
		198	78.1	—**	—**	—**	—**	D-2-OUT
		201	79.3	30	1.18	45	1.77	E-2-OUT
540/65R24	625	152	60.0	95	3.74	95	3.74	B-2-IN	A4-C1	TIRE	UP	CTR
		181*	71.3*	55	2.17	70	2.76	E-1-IN
540/65R24	625	152	59.9	95	3.74	95	3.74	B-2-IN	A4-C1	TIRE	UP	CTR
		155	61.1	95	3.74	95	3.74	C-2-IN
		158	62.4	90	3.54	95	3.74	C-2-IN
		1614	63.5	85	3.35	95	3.74	D-2-IN
		172	67.6	75	2.95	90	3.54	D-1-IN
		175	68.8	70	2.76	85	3.35	D-1-IN
		178	70.1	65	2.56	80	3.15	E-1-IN
		181*	71.3*	55	2.17	70	2.76	E-1-IN
		192	75.7	35	1.38	50	1.97	C-1-OUT
		195	76.9	30	1.18	45	1.77	D-1-OUT
		198	78.1	30	1.18	45	1.77	E-1-OUT
		201	79.3	30	1.18	45	1.77	E-1-OUT
540/65R28	675	153	60.2	—**	—**	15	0.59	—**	—**	—**	—**	—**
		181*	71.3*	95	3.74	95	3.74	E-1-IN	B5-D2	TIRE	ADJ	CTR
540/65R28	675	181*	71.3*	—**	—**	15	0.59	A-1-OUT	B5-D2	TIRE	UP	CTR
* Tread width setting on delivery. Recommended tread width for front loader operation. ** No adjustment of steering stops and/or attachment of fenders possible.