CommandQuad™ PLUS — Come-Home Mode

LX266712-UN-22JAN16

In the event of a transmission malfunction, the tractor can still be operated at a maximum speed of 22 km/h (13.7 mph) and a maximum engine speed of 1500 rpm.

To do this, stop the engine, pull out plug (A), turn it 90° clockwise, and re-insert it as shown. Then restart the engine.

Refer also to fuses and relays (LCS) with CommandQuad™ PLUS transmission in the section Service - As Required.

NOTE: In come-home mode:

1. Engine RPM is limited to 1500 rpm.
2. Only the third gear is available in each speed range.
3. The AutoClutch function is disabled.
4. Stop the tractor to switch between speed ranges.
5. Changing direction is possible only when the machine is stopped and the clutch pedal is pressed.

To start, proceed as follows:

1. Comply with instructions on the instrument panel.
2. Press and hold down the clutch pedal.
3. Select the desired range.
4. Use the reverse drive lever to select direction of travel.
5. Start by gradually releasing the clutch pedal.