Permissible Front Axle Load in Relation to Tires (Normal Operation) - 6095MC to 6115MC Tractors, Without Front-Wheel Drive

Permissible front axle load (for front axle without front-wheel drive), normal operation up to 40 km/h (25 mph)					6095MC to 6115MC
Tires	SRI *	LI **	Load capacity of the tires with 2 tires per axle		Permissible front axle load with 2 tires per axle
	mm		kg	lb	kg	lb
10.00-16	425	10PR	2650	584	2050***	4520***
11.00-16	450	12PR	3100	6835	2050***	4520***
11L-15	390	8PR	2120	4675	2050***	4520***
* Speed/radius index ** Load index *** The load capacity of the tires exceeds the permissible front axle load. Therefore, the values of the permissible front axle load are given here.					6095MC to 6115MC Maximum permissible front axle load, normal operation up to 40 km/h max.
					2050	4520

NOTE: Maximum tire load capacity depends on the recommended tire air pressure. The load capacity of the tires may differ from one manufacturer to another. Always comply with manufacturer's instructions. The values presented in the tables are not exhaustive.

Use of tires with a load capacity exceeding the front axle load capacity allows lowering of the recommended tire pressure without any effect on the permissible front axle load. This can be advantageous when operating in difficult ground conditions.

When reducing air pressure in the tires, refer to load capacity tables and tire pressure recommendations of the relevant tire manufacturers.

NOTE: Traffic regulations in certain countries may restrict the permissible axle loads and total weight to figures lower than those quoted above.