CAUTION: Do not add oil to reservoir with engine running. Injury from unexpected hitch or cylinder movement may occur.

NOTE: Implements with large hydraulic cylinders can remove substantial volumes of hydraulic oil from the transmission-hydraulic system of the tractor. Use wagon tilt kit for hydraulic cylinders using more than 20 L (21 qt) of oil.

Cycle all implement cylinders after starting tractor. Check the transmission-hydraulic oil level. (See

Operation with higher fill levels (if not removed afterward) can result in additional power loss and wasted heat generation the oil cooler has to reject.

Raise function of hitch and extend function of SCVs may be disabled if excessive oil is removed from oil reservoir. Lower the hitch and retract the cylinders to return oil to reservoir.

AG,RX15494,3096 -19-11NOV99-1/1