Using Auxiliary Heaters
CAUTION:
To avoid electrical shock or fire, use a 3-wire, 14 AWG (14 gauge), heavy-duty, electrical cord with 15-amp rating, suitable for outdoor use. Always plug electrical cord into a 120-volt outlet protected by GFI (ground fault interrupter).
IMPORTANT:
Test all ground fault interrupters before each use.
Auxiliary heaters are available from your John Deere Dealer:
-
Engine Coolant
-
Transmission and Hydraulic Charge Pump
1
Connect the heaters and the ground fault interrupter to a ground fault protected 120-volt electrical outlet.
|