|
SCV metering valve knob will not turn
|
Dirt build-up
|
Clean dirt under metering valve knob
|
|
Remote cylinder will not lift load
|
Flow check
|
Cycle SCV levers
|
|
|
Excessive load
|
Reduce load
|
|
|
Hoses not completely installed
|
Attach hoses correctly
|
|
|
Incorrect remote cylinder size
|
Use correct size cylinder
|
|
Remote cylinder rate of travel too fast or too slow
|
Incorrect rate of operation
|
Adjust rate of operation
|
|
Direction of remote cylinder travel is reversed
|
Incorrect hose connections
|
Reverse hose connections
|
|
Hoses will not couple
|
Incorrect hose male connectors
|
Replace connectors with ISO Standard connectors
|
|
Detent does not hold or releases too soon
|
Detent selector in wrong position
|
Turn selector to correct position
|
|
|
Pressure restriction with some implements
|
Reduce oil flow by changing metering valve setting
|
|
|
Flow control or detent release setting incorrect
|
Adjust detent relief setting
|
|
SCV lever does not release
|
Detent selector not in the automatic detent position
|
Turn selector to correct position
|
|
|
Built-in pressure leakage with some implements
|
Increase oil flow by changing metering valve setting
|
|
|
Flow control or detent release setting incorrect
|
Adjust detent relief setting
|