Checking Coolant

Check coolant level before starting the tractor. Coolant level should be at or slightly above lower mark when engine is cold.

If coolant level is low, check for any signs of leakage and repair if necessary.

Add coolant to overflow tank as specified in Fuels, Lubricants and Coolant Section.

Check coolant using coolant test strips available from your John Deere Dealer.

IMPORTANT: If John Deere COOL-GARD is not used, add 30 ml per liter of John Deere Coolant Conditioner for every liter of coolant added (4 fluid ounces per gallon).

AG,RF30435,2208 -19-19NOV99-1/1