|
IMPORTANT:
Idle engine for 1 or 2 minutes at 1000-1200 rpm before stopping engine that has been operating at working load.
Stop tractor and pull throttle back to slow idle position.
CAUTION:
Prevent possible injury or death. Leaving transmission in gear with engine stopped WILL NOT prevent tractor from moving.
12- or 24- Speed Transmission
Put gear-shift lever in NEUTRAL position and range-shift lever in PARK position before dismounting. Never leave the tractor unattended with the engine running.
|
Powershift Transmission
Depress brake pedals until tractor stops. Move shift lever to NEUTRAL position and engage park brake.
Lower all equipment to the ground.
Make sure SCV levers are in the NEUTRAL position and PTO switch is disengaged.
CAUTION:
Remove ignition switch key to prevent accidents.
Turn ignition switch key to
OFF
position and remove key.
|