Using Steering Stops
IMPORTANT:
Steering stops (A) must be installed if tractor is equipped with dual tires when outer tire treads are greater than 3343 mm (131.6 in.) or if equipped with triple tires.
Check clearance by turning steering wheel to full left and full right positions after installing steering stops and adjusting wheel treads.
Tighten steering stop retaining cap screw to 90 N·m (66 lb-ft).
| Tires |
Steering Stop |
Tread Settings |
| |
|
|
| 18.4-42 Duals |
- |
|
| 20.8-38 Duals |
- |
|
| 620/70R42 Singles |
3° |
|
| 620/70R42 Duals |
3° |
|
| 18.4-46 Duals |
5° |
|
| 710/70R38 Singles |
5° |
|
| 710/70R38 Duals |
5° |
|
| 710/70R42 Duals |
10° |
|
| 750/65-38 Duals |
10° |
|
| 850/60-38 Duals |
10° |
|
900/50R42 (Inner)
710/70R38 (Outer) |
10°
10° |
|
| 20.8-42 Duals |
3° |
Over 3343 mm (131.6 in.) |
| 18.4-42 Triples |
5° |
Over 4008 mm (157.8 in.) |
| 18.4-42 Triples |
10° |
Over 4107 mm (161.7 in.) |
| 18.4-46 Triples |
10° |
Over 4107 mm (161.7 in.) |
| 20.8-42 Triples |
10° |
Over 4420 mm (174.0 in.) |
|
