|
CODE SCo 22, 27, 28
|
SCV IV or V not working correctly, controller
|
Have your John Deere Dealer repair
|
|
CODE SCo 29
|
Calibration selected for less than 30 seconds
|
Have your John Deere Dealer repair
|
|
CODE SCo 60
|
SCV levers inoperative, SCV communication link
|
Stop and restart engine
Have your John Deere Dealer repair
|
|
CODE SCo 90
|
Low hydraulic oil level
|
Add hydraulic oil. (See Lubrication Section)
|
|
CODE SCo 100
|
Operator not in seat with SCV in detented flow with transmission in NEUTRAL position (Warning)
|
If not stationary SCV use, return to seat or move SCV lever to neutral before leaving cab. (See the Operator Station Section)
|
|
CODE SCo 140, 141, 142, 143, 144
|
SCV IV not working
|
Have your John Deere Dealer repair
|
|
CODE SCo 150, 151, 152, 153, 154
|
SCV V not working
|
Have your John Deere Dealer repair
|