Checking Manual Brakes

SERVICE INTERVAL - 250 HOURS
 

 

With engine stopped, check manual brakes for correct function:

1. Pump individually the left brake (A) and right brake (B). The pedals should have a solid feel. If pedals do not feel solid, bleeding the brakes may be necessary. See your John Deere Dealer.

2. Check to make sure the pedals do not settle to the end of stroke within 10 seconds after being applied. If leakage exceeds this rate or if one pedal settles faster than the other, see your John Deere Dealer.

IMPORTANT: Any noticeable pedal drift downward from the point of resistance indicates brake leakage. See your John Deere Dealer.

A solid pedal is important for emergency braking conditions when the latch bar is used.

RW55375A

AG,RX15494,3171 -19-01JUN04-1/1