Connecting Hydraulic Hoses

causym CAUTION: Push transport lock touch switch (A) on SCV TouchSet monitor before attaching implements to prevent implement movement and possible personal injury.

IMPORTANT: Hydraulic hoses can fail due to physical damage, kinks, age and exposure. Check hoses regularly.

Be sure hose ends are clean prior to use to minimize hydraulic system contamination.

Clean dust covers (B). Turn dust covers upward to expose coupler ports.

NOTE: Remote cylinder couplers are designated I through V with I being the bottom coupler.

Check to be sure connection on coupler matches cylinder travel direction required.

When using SCV with single-acting cylinders, plug hose into extend side of coupler (D).


A-Transport Lock Touch Switch
B-Dust Covers
C-Retract Side
D-Extend Side

RW26141

Touch Set Monitor

RXA0052509

SCV Connections - Early Style Covers

RXA0066699

SCV Connections - Late Style Covers

OURX935,0000009 -19-16APR03-1/2

NOTE: Each SCV lever work the same way. If connecting to SCV 1, move left most SCV lever, marked SCV 1 on command arm.

Move SCV lever forward and rearward to open flow path, before implement can be raised or lowered.

Move SCV lever (B) to neutral position with no time flow "commanded".

Push hose (A) firmly into receptacle.


A-Hydraulic Hose
B-SCV Lever

RXA0052745
RXA0071118

OURX935,0000009 -19-16APR03-2/2