Raise hood and remove screws (A) and cap screws (B).

Unhook clips (C) and pull out bezel.

OURX935,000008B -19-29SEP03-1/3

Remove Dust boot (A) and retaining ring (B) to replace bulb element (C) for halogen light.

A-Dust Boot
B-Retaining Ring
C-Bulb Element

OURX935,000008B -19-29SEP03-2/3

CAUTION: Wear gloves and safety glasses when handling bulbs. Dangerous voltage spark-over may occur and cause damage/injury at the connector. See manufacturer warning packaged with replacement bulb.

Disconnect wiring harness from HID assembly.

Press in on HID assembly (A) and remove retainer (B) using a screwdriver.

Replace assembly and install retainer.

A-HID Assembly
B-Retainer

OURX935,000008B -19-29SEP03-3/3