Lubricating Independent Link Suspension Axle U-Joints

Lubricate ILS U-joints: In normal conditions, every 250 hours Or In extremely wet conditions, daily or every 10 hours Apply grease to both inboard u-joints using, fitting (A).

Drilled passages in the cross allow grease to reach all four bearings from a single lube fitting.

A-Grease Fitting

OURX935,000009F -19-27SEP02-1/2

For normal operations, outboard U-joints are sealed and not equipped with lube fittings. For extremely wet conditions,

1. Replace plugs with M10 thread 90-degree grease fittings (A), part number 58M5580.
2. Lubricate U-joints daily or every 10 hours.

A-Grease Fitting

OURX935,000009F -19-27SEP02-2/2