Using Implement Requiring Large Volumes of Oil
NOTE:
Do not add oil to reservoir with engine running.
IMPORTANT:
Equipment with large cylinders may require additional oil. Remove any additional oil after using the implement. Removing too much oil can result in malfunction when raising the hitch or using the "extend" function of SCVs.
Cycle all implement cylinders after starting tractor.
Check the transmission-hydraulic oil level. (See Checking Transmission-Hydraulic Oil Level in the Lubrication Section.)
Add oil if required.
Lower the implement to return the oil to the reservoir.
Recheck oil level when implement is removed.
Drain excess oil if necessary.
|