Using Rear Wheel Weights

CAUTION: When installing weights, use appropriate equipment or have the job performed by your John Deere Dealer.

NOTE: When using 1524 mm (60 in.) tread setting, maximum of two 205 kg (450 lb) or one 680 kg (1500 lb) weight can be installed on inside of wheel.

Install weights (A) on wheel.

Weight Attaching Bolts - Specification

For additional weights, install bolts in previous weight. Rotate alternate weight to align bolts with weight holes.

Tighten bolts and then retighten after driving approximately 100 meters (100 yd).

Retighten bolts after working 3 HOURS and again after 10 HOURS .

Check tightness every 250 hours.

IMPORTANT: Inside wheel weights must have at least 25 mm (1 in.) clearance between weight and tractor components.

RX15494,000000A -19-22OCT01-1/1