Using a Battery Booster or Charger
CAUTION:
Gas given off by batteries is explosive. Keep sparks and flames away from batteries. Make last connection and first disconnection at a point away from booster batteries.
IMPORTANT:
Be sure polarity is correct before making connections. Reversed polarity will damage electrical system or possibly cause an explosion of a battery.
Booster Battery
1.
Attach one cable (red) to the remote positive terminal (A) of the starter and positive terminal of booster battery.
2.
Attach the second (black) battery cable to negative terminal of booster battery. Attach other end to a ground (B) on tractor frame.
3.
Remove ground cable (B) first when disconnecting.
Battery Charger
1.
Attach positive charger lead to positive remote terminal (A) with charger in OFF position. Attach negative charger lead to negative ground (B) at tractor frame, away from batteries.
2.
Switch charger to ON and charge battery according to charger manufacturer's instructions.
3.
Switch charger to OFF. Remove negative charger lead first, then positive lead.
|