Operating Automatic Powershift

Automatic PowerShift feature shifts the transmission to maintain engine speed. The transmission will not shift above the maximum gear selected. The controller determines shift points based on throttle setting, engine speed, and engine load.

The transmission will downshift as many gears as necessary under heavy load. A change in throttle position allows a maximum downshift or upshift of three gears.

Set throttle to full engine rpm.

Select the maximum forward gear.

Press the SET switch (A). Indicator (B) will light. Automatic PowerShift will downshift and upshift as engine rpm or load changes.

RW26387

RX15494,0000028 -19-08AUG01-1/2

Any manual shift cancels Automatic PowerShift. Pushing the RESUME switch (A) restores control of shifting to Automatic PowerShift.

Depressing the clutch pedal suspends Automatic PowerShift but will not cancel the function. Automatic PowerShift will resume when clutch pedal is released.

NOTE: Automatic PowerShift can be programmed into Implement Management System (IMS). See Implement Management System Section.

Automatic PowerShift is cancelled when:

  • Operator shifts transmission
  • Operator shifts to NEUTRAL or REVERSE
RXA0056416

RX15494,0000028 -19-08AUG01-2/2