IMS Functions - Selective Control Valves

NOTE: Learning requires SCV to be in detent position .

Flow Rate and Timed Detent will not be learned and can be changed at any time.

IMS can learn four functions for SCVs:

  • Extend Detent
  • Retract Detent
  • Float ON
  • Cancel Detent

SCV control lever must be in the neutral position during execution of a sequence.

NOTE: SCVs can be operated manually without causing a sequence to abort.

TouchSet Scraper Control can not be programed in IMS.

RXA0056429

RX15494,0000031 -19-09AUG01-1/1