Adjusting Implement Level

IMPORTANT: When attaching to upper hole, do not adjust center link length more than 762 mm (30 in.) to avoid interference between quick coupler and center link in high lift. Center link could be damaged.

Adjust center link to level implement front-to-rear. Remove locking ring (A), lift handle (B) and slide collar rearward. Rotate center portion of center link to desired position.

Secure handle with locking ring.

Measure between centers of pins (C).

Center Link - Specification

Adjustment -Length 694-865 mm (27.4-34 in.)

RXA0056496

RX15494,000004F -19-10SEP01-1/2

Adjust lift links to level implement side-to-side. Slide collar (A) downward. Rotate center portion (B) of lift link to desired position.

Secure collar in position.

Measure between centers of pins (C). Float should be locked out.

Lift Link - Specification

Adjustment -Length 1009-1187 mm (39.7-46.7 in.)

RXA0056497

RX15494,000004F -19-10SEP01-2/2