Lubricating MFWD Axle-Standard

SERVICE INTERVAL - 250 HOURS *
 
* Daily or 10 Hours in extremely wet conditions or when using Auto Trac.

 

Use John Deere Non-Clay grease. DO NOT use Arctic grease with specification requirements per MIL-G-10-924C.

Kingpins -Lubricate fittings (A) with grease until grease appears at orifice on bottom end of each kingpin bearing.

Tie Rods -Lubricate fittings (B) with grease.

Steering Cylinder -Lubricate fittings (C) with grease.

Axle Pivot -Lubricate front and rear fittings (D) with grease.

RW56651A
RW56652A

RX15494,0000085 -19-15OCT01-1/1