Changing MFWD Wheel Hub Oil

SERVICE INTERVAL - 1500 HOURS
 

 

1. Put the tractor on level surface.

2. Rotate wheel until drain fill hole (A) is at bottom of hub. Remove plug and drain oil.

3. Rotate wheel with drain-fill plug positioned horizontally after oil has drained.

4. Add John Deere HY-GARD ® through drain-fill hole until oil is even with bottom of hole. Install the plug.

Wheel Hub Capacity (Each)
 
Standard MFWD Axle ... 3.4 L (3.6 qt)
MFWD Axle with Independent Link Suspension ... 4.0 L (4.2 qt)

 
RW26336

HY-GARD is a trademark of Deere & Company

RX15494,00000AF -19-22OCT01-1/1