Engine Control Unit Service Codes (ECU)
CODE ECU 21, 22
|
Sensor supply voltage out of range
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 23, 24
|
Manifold air temperature data not valid or not received
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 25, 26
|
Coolant temperature voltage out of range
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 27
|
Throttle position data not valid or not received
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine will only idle
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 31, 34, 53
|
Fuel injection pump rack position error
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine does not start, runs erratically, or possible power changes
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 35, 36
|
Fuel injection pump rack position voltage out of range
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine does not start, runs erratically, or possible power changes
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 37, 38
|
Fuel temperature voltage out of range (sensor) - No harm to engine
|
Have your John Deere Dealer repair at earliest convenience
|
|
Engine power changes, hard or smoky starting - No harm to engine
|
Have your John Deere Dealer repair at earliest convenience
|
CODE ECU 41
|
Start signal missing
|
Have your John Deere Dealer repair at earliest convenience, if not caused by key switch operation
|
|
Key switch turned to OFF and back ON while engine was running
|
Wait for engine to come to complete stop before restarting
|
|
RX15494,00000C8 -19-07SEP01-1/5
|
Symptom |
Problem |
Solution |
CODE ECU 42
|
Engine overspeed
|
Result of downshifting, throttle back
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 44
|
Erratic engine speed input
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 46
|
Start signal always active
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 49
|
External shutdown signal invalid
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine will not start
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 54
|
Intermittent loss of Engine Control Unit (ECU) power supply
|
Have your John Deere Dealer repair at earliest convenience
|
CODE ECU 55
|
Controller Area Network (CAN) error
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 56, 57, 58, 59
|
Fan speed problem
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 61
|
Loss of coolant detected - Engine damage possible
|
Stop engine, have your John Deere Dealer repair immediately
|
CODE ECU 62
|
Engine coolant temperature moderately high
|
Check for debris restricting radiator air flow, reduce load on engine, have your John Deere Dealer repair as soon as possible
|
CODE ECU 63
|
Engine coolant temperature extremely high - Engine damage possible
|
Stop engine, have your John Deere Dealer repair immediately
|
CODE ECU 66
|
Manifold air temperature high
|
Check for debris restricting after cooler air flow, reduce load on engine, have your John Deere Dealer repair as soon as possible
|
CODE ECU 67
|
Engine protection shutdown notification
|
Stop engine, have your John Deere Dealer repair immediately
|
|
RX15494,00000C8 -19-07SEP01-2/5
|
Symptom |
Problem |
Solution |
CODE ECU 68
|
Engine protection derate notification
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 75, 76, 77
|
Fuel injection pump rack actuator fault
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine does not start, runs erratically, or possible power changes
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 81
|
Fuel level low
|
Fill tank with fuel
|
|
Fuel temperature high
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 83
|
External engine shutdown request received
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine dies and will not restart
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 85, 86, 87
|
Engine speed sensor fault
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine does not start or runs erratically
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 88, 89
|
Engine speed sensor fault
|
Have your John Deere Dealer repair as soon as possible
|
|
Engine does not start or runs erratically
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 91
|
Current problem to injector #1
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 92
|
Current problem to injector #2
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 93
|
Current problem to injector #3
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 94
|
Current problem to injector #4
|
Have your John Deere Dealer repair as soon as possible
|
|
RX15494,00000C8 -19-07SEP01-3/5
|
Symptom |
Problem |
Solution |
CODE ECU 95
|
Current problem to injector #5
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 96
|
Current problem to injector #6
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 97
|
All injector currents out of specification
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 98, 99
|
Injector drive circuit shorted
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 110, 120, 130, 140, 150, 160
|
Electronic injector mechanical failure
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 127, 129
|
Rail pressure sensor is out of range
|
Have your John Deere Dealer repair as soon as possible
|
|
Rail pressure sensor failure-Tractor lacks power
|
Rail pressure relief valve orifice needs to be replaced. Have your John Deere Dealer repair as soon as possible
|
CODE ECU 131, 132, 133, 134, 135, 136
|
Current to injectors is low
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 141, 142, 143, 144, 145
|
Signal problem on engine position sensor on crankshaft
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 171
|
Rail pressure dropping too rapidly
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 172
|
Rail pressure low during start
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 173, 174
|
Connection to rail pressure sensor is shorted
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 175
|
Water is detected at the sensor
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 176
|
Water in fuel sensor failure
|
Have your John Deere Dealer repair as soon as possible
|
CODE ECU 177
|
Circuit to pump solenoid #1 is open, shorted to ground, or overloaded
|
Have your John Deere Dealer repair as soon as possible
|
|
RX15494,00000C8 -19-07SEP01-4/5
|
Symptom |
Problem |
Solution |
CODE ECU 178
|
Fuel filter is restricted
|
Replace fuel filter
|
CODE ECU 179
|
Circuit to pump solenoid #2 is open, shorted to ground, or overloaded
|
Have your John Deere Dealer repair as soon as possible
|
|
RX15494,00000C8 -19-07SEP01-5/5
|
|