Draining Clean Oil Reservoir

IMPORTANT: Change oil in clean oil reservoir if oil is contaminated with water.

Drain transmission-hydraulic oil.

Remove the cap screws and flange from oil pipe (A). Turn pipe downward to allow oil to drain slowly. Drain 22.5-26.5 L (6-7 gal) of oil from reservoir.

Install oil line making sure O-ring is correctly positioned.

IMPORTANT: Fill differential housing with oil. Start engine and run at slow idle until Clean Oil Reservoir oil level indicator light goes off (approximately 2 minutes).

RX15494,0000137 -19-05JAN05-1/1