Rear Drive Wheel - Installing

CAUTION: Avoid the possibility of personal injury. Never operate tractor with loose wheel bolts.

NOTE: The wheel rim (A) has one tight fit hole smaller than the other holes. One slot fit hole is 180° from the tight fit hole.

Install and hand tighten bolt in the tight fit hole (B).

Install and hand tighten bolt in the slot fit hole (C).

Install and hand tighten remaining bolts.

Tighten all bolts until bolts maintain torque of 600 N·m (445 lb-ft).

Drive tractor 100 meters (100 yd) and retighten bolts.

Tighten again at 3 HOURS , 10 HOURS , and DAILY for the first week of operation.

RX15494,0000149 -19-15OCT01-1/1