Independent Link Suspension Adjust Toe-In

causym CAUTION: For tractors equipped with front hitch, avoid possible personal injury and equipment damage. DO NOT use the front hitch to lift the tractor. Use correct lifting equipment.

1. Check to make sure axle is centered.

2. Loosen clamp bolts (A) on both tie rods.

3. Rotate inboard pin (B) using the wrench flats (C). One full revolution of both pins changes toe-in approximately 20 mm.

4. Tighten clamp bolts (A) on both tie rods.

Clamp Bolt - Specification

Bolt -Torque 125 N·m (90 lb-ft)

RXA0056534

RX15494,0000185 -19-22OCT01-1/1