CAUTION: Avoid personal injury. Stop the engine and allow the PTO driveline to stop before adjusting, connecting, or cleaning PTO-driven equipment.

Always disengage the PTO when not in use.

PTO can be engaged or disengaged without operating the clutch.

NOTE: PTO and Service Alert indicator lights will flash with an audible warning signal if operator leaves seat with PTO engaged. PTO does not disengage while operator is absent from the seat.

Push down and forward on PTO switch (A) to engage PTO clutch. The PTO indicator on display panel will light.

IMPORTANT: If PTO disengages during start up in cold-weather operation, wait 5 minutes before re-engaging PTO to avoid damage.

Pull back PTO switch to disengage clutch and PTO brake will engage automatically.

NOTE: If engine is stopped and then restarted while PTO is running, PTO will not operate. Disengage PTO control switch and then engage the PTO again.

AG,RF30435,1548 -19-26JUL00-1/1