IMPORTANT: Before stopping engine that has been operating at working load, idle engine at least 1 or 2 minutes at 1000-1200 rpm to cool hot engine parts.

1. Stop tractor and pull throttle back to slow idle position.

2. Put shift lever in PARK position before dismounting.

3. Lower all equipment to the ground.

4. Make sure SCV levers are in the neutral position and PTO switch is disengaged.

CAUTION: Remove ignition switch key to prevent accidents.

5. Turn ignition switch key to OFF position and remove key.

AG,RX15494,2665 -19-27OCT99-1/1