CAUTION: Do not add oil to reservoir with engine running. Injury from unexpected hitch or cylinder movement may occur.

NOTE: Implements with large cylinders can remove substantial volumes of oil from the transmission-hydraulic system. Use wagon tilt kit for hydraulic cylinders using more than 20 L (21 qt) of oil.

Cycle all implement cylinders after starting tractor. Check the transmission-hydraulic oil level. (See Check

Operation with higher volumes of oil, if not removed afterward, can result in additional power loss and excess heat generation.

Raise function of hitch and extend function of SCVs may be disabled if excessive oil is removed from oil reservoir. Lower the hitch and retract the cylinders to return oil to reservoir.

AG,RX15494,2749 -19-27OCT99-1/1