CAUTION: Do not add hydraulic oil to reservoir with engine running. Injury from unexpected hitch or cylinder movement can occur.

IMPORTANT: Power loss and excess heat generation can result if the additional large volume of oil is not removed after using the implement. Removing too much oil can result in malfunction when raising the hitch or using the "extend" function of SCVs.

Cycle all implement cylinders after starting tractor.

Check the hydraulic oil level. (See CHECKING HYDRAULIC OIL LEVEL in the Lubrication Section.)

Add oil if required.

Lower implement to return oil to the reservoir.

Recheck oil level when implement is removed.

Drain any excess oil from hydraulic reservoir.

RW29387,000013D -19-23OCT02-1/1