CAUTION: Do not add oil to reservoir with engine running. Injury from unexpected hitch or cylinder movement may occur.

NOTE: Implements with large hydraulic cylinders (such as dump wagons) can remove substantial volumes of hydraulic oil from the transmission-hydraulic system of the tractor.

IMPORTANT: Power loss, excess heat generation or reduction in drivetrain efficiency can result if additional large volume of oil is not removed after using the implement.

Removing too much oil can result in malfunction when raising the hitch

or using the "extend" function of SCVs.

2. Check the transmission-hydraulic oil level. (See CHECKING TRANSMISSION-HYDRAULIC OIL LEVEL in Lubrication section).

3. Add oil if required.

4. Lower implement and retract cylinders to return oil to reservoir.

5. Recheck oil level after removing implement.

6. Drain excess oil if necessary.

OUMX005,00015F7 -19-22MAR05-1/1