Stopping the Engine

IMPORTANT: Before stopping engine that has been operating at working load, idle engine at least 1 or 2 minutes at 1000-1200 rpm to cool hot engine parts.

1. Stop tractor and pull throttle back to slow idle position.

2. Depress clutch and brake pedals.

3. PowrQuad-Plus (PQ+) and AutoQuad-Plus (AQ+) ; Put range shift lever in PARK position.

4. Make sure left-hand reverser is in:

  • PowrQuad-Plus (PQ+) and AutoQuad-Plus (AQ+) ; NEUTRAL position
  • AutoPowr; PARK position

5. Lower all equipment to the ground.

6. Make sure SCV levers are in NEUTRAL position.

7. Make sure PTO switch is disengaged.

causym CAUTION: Remove ignition switch key to help prevent accidents.

8. Turn ignition key to OFF position and remove key.

OU1092A,0000351 -19-03JUN05-1/1