Two-Wheel Drive Front Axle Toe-In Adjustment

1. Remove bolts (A) from tie rod tube and loosen clamp (B).

2. Rotate tube to lengthen or shorten tie rod. Adjust toe-in to 3-7 mm (1/8-1/4 in.).

3. Replace bolts, tighten nuts to 61 N·m (45 lb-ft) and tighten clamp to 68 N·m (50 lb-ft).


A-Tie Rod Bolts
B-Clamp

RW55002A
RW55003

AG,RX15494,1771 -19-31AUG99-1/1