Check MFWD Wheel Hub Oil Level

1. Turn wheels until OIL LEVEL mark (A) is in horizontal position.

2. Remove oil level plug (B) and check that oil level is just below edge of plug hole.

3. Add transmission oil if necessary. (See MFWD AXLE HOUSING AND WHEEL HUB OIL, in Fuels, Lubricants and Coolant section.)

4. Reinstall plug and tighten to 150 N·m (110 lb-ft) on 7220 and 7320 tractors and to 120 N·m (90 lb-ft) on 7420 and 7520 tractors.

For capacities, see Specifications section.

RW27118


A-OIL LEVEL Mark
B-Oil Level Plug

LX,OMWAR013359 -19-01MAY00-1/1