Address
|
Meaning
|
Value
|
BCU 024
|
Display, performance monitor
|
000 customary units (mph; ft; etc.)
001 metric units (km/h, m, etc.) |
| BCU 025 |
Country Selection |
SAE vs Metric |
BCU 026
|
Audible indicator for turn signals
|
000 audible indicator off
001 audible indicator on |
| BCU 056 |
Wheel Dynamic Rolling Radius |
see your John Deere Dealer for proper setting |
BCU 165
|
Rate of lift adjustment*
|
000 min. rate of lift
255 max. rate of lift |
BIF 024
|
Display, Dual Gauge
|
000 customary units (mph; ft; etc.)
001 metric units (km/h, m, etc.) |
BIF 028
|
Clock operation
|
000 time is not displayed
001 time is displayed in 12-hour system
002 time is displayed in 24-hour system |
| BIF 035 |
Brightness of instrument lighting |
possible settings between 000 (dark) to 100 (bright) |
BIF 038
|
Language setting
|
000 English
001 German
002 French
003 Spanish
004 no text, codes and symbols only |
BIF 039
|
Analog speed display
|
000 no analog display
001 mainly PTO speed display
002 mainly engine speed display |
| UIC 42 |
Wheel dynamic rolling radius |
see your John Deere Dealer for proper setting |
| UIC 43 |
MFWD clutch ratio |
see your John Deere Dealer for proper setting |
| EPC029 |
Engine-speed matching when shifting gears |
000 always switched off
001 switched on, but off when PTO is operating
002 always switched on |
PrF
|
Brightness of lighting
|
possible settings between 000 (dark) to 100 (bright)
|
| SIC041 |
Front loader or front-mounted implement |
possible settings 000 front loader to 001 front-mounted implement |
| * This adjustment only takes effect when the rockshaft is operated by means of the rocker switch |