Performance Monitor-Data Entry and Saving Mode

SET/SAVE

Press a switch from the touch pad, to preset or change values for:

  • Area
  • % Slip Alarm
  • Distance
  • Implement Width
  • Implement Selector
  • Time Since Last Service
  • Service Interval
  • Backlight Brightness

1. Press SET/SAVE (C) to change the numeric value. Display field will flash.

NOTE: Press CANCEL (A) to restore previous value before pressing SET/SAVE .

Press "0" ZERO switch (B) for 4 seconds to reset a numeric value to "0".

2. Input a numeric value using touch pads, then press SET/SAVE (C) again.

RW26098


A-CANCEL
B-"0" ZERO
C-SET/SAVE

AG,RX15494,2359 -19-08OCT99-1/1