Performance Monitor-Area, Distance, Area/H, Width, and PTO RPM

NOTE: Calculations for AREA and AREA/H are based on implement width and ground speed. Use a radar sensor for the most accurate values.

AREA

Press AREA switch (C) to display accumulated area in acres or hectares. The implement arrow indicator (B) must be in the down position to accumulate area.

Hold ZERO switch (I) to clear accumulated area.

DISTANCE

Press DISTANCE switch (E) to display distance accumulated in meters or feet.

Distance is accumulated with the implement indicator (B) in the down position.

Measurement is cleared when the ignition is switched to the OFF position.

AREA/H

Press AREA/H switch (D) to display the current measurement for area coverage per hour.

Implement indicator must be in the down position.

WIDTH

Press WIDTH switch (G) to display measurement for implement width.

Press SET/SAVE switch (H) to change implement width.

Input implement width and press SET/SAVE switch (H).

PTO RPM

Press PTO RPM switch (F) to display PTO speed.

A-Implement Selector
B-Implement Indicator
C-AREA
D-AREA/H
E-DISTANCE
F-PTO RPM
G-WIDTH
H-SET/SAVE
I-"0" ZERO

AG,RX15494,2362 -19-08OCT99-1/1