Replacing Secondary Fuel Filter-If Equipped

Clean exterior of fuel filter (A) and mounting area.

Remove and discard old filter element.

NOTE: Do not preload fuel filter before installing, which may result in fuel contamination.

NOTE: Secondary fuel filter is a 2 micron element.

Inspect new filter to ensure O-ring seal is in correct position.

Apply thin coat of clean diesel fuel to lubricate O-ring.

Install new filter and tighten.

Operate engine at 1200 rpm for one minute and check for leaks.

A-Secondary Fuel Filter

OU1092A,000003D -19-12MAY04-1/1