Implement Connection Example 1-Pressure Control Valve Applications (Grain Drills or Air Seeders with Constant Down-Pressure System)-Less Hitch-Standard Hydraulics
|
|
|
|
|
|
For implements using active down force set flow control to continuous and move lever to detent position. This will cause hydraulic pump to operate at maximum pressure which may cause overheating of hydraulic oil |
if operating when outside air temperature is high. To avoid this problem, try not to operate more than one hydraulic motor with tractor hydraulic system when active down force is being used. |
OU1092A,000008E -19-23SEP04-1/1 |