Using Auxiliary Power Strip-If Equipped

IMPORTANT: Power strip is not a surge suppressor. Electrical equipment with program memory requires protection from damage of electrical surges and spikes.

The power strip (A) provides six outlets, of 12-volt power with grounds. This power is 30 amp switched and 30 amp unswitched. The connectors can be used when connecting auxiliary equipment.

Adapters plug directly into power strip as unswitched power. To change to switched power on cigar lighter adapter or standard adapter (with three wires), remove small tab at end of slot on plug and rotate plug 180°.

NOTE: The small white dot on adapter plug face next to the cap hinge indicates circuit is unswitched . If dot is opposite cap hinge, circuit is switched .

Adapters are available from your John Deere Dealer for the following: cigarette lighter adapters, 3-way convenience adapters, and standard adapters.

A-Power Strip

OURX984,0000067 -19-17OCT02-1/1