Using Field Cruise and Foot Decelerator
Field Cruise
-Push engine throttle all the way forward and turn knob (A) to set engine speed as follows:
-
OFF
(Turn knob fully clockwise)
Use for heavy tillage field work, such as moldboard plowing, chisel plowing or ripping
-
ON
(Turn knob counterclockwise from detent)
Use when constant speed is required for a particular application, such as planting, fertilizing, or applying herbicide
Engine speed can be adjusted from 1450-2100 rpm by rotating knob
Engine speed remains constant at set speed below full load conditions
Foot Decelerator
1
-Push button (B) to lower engine rpm until released. Speed resumes when released.
A-Knob
B-Button
|
|
